- Design with both illuminative and decorative purpose
- Clear PMMA lens with frosted part to optimize the beam
- Blue mode light for night application
- Three levels of brightness setting
- Highly polished screw caps and switch
- Memory function for convenient control
- Efficient heat dissipation for stable performance
- 10-15 volts DC
-
LED Square Crystal Section light with the push-button operation. Stylish polished metalised reflector for a consistent and exceptional interior providing optimum illumination. Operating on 12-volt power, it is the perfect ceiling light for any caravan or motorhome. Features: -
24 super bright SMD chip LEDs • Lighting color: Cool White/blue • Operating voltage: 12V DC • Low power consumption: 4.8W, 400mA • Luminous flux: 330lumens • Light angle: 120 degrees • 120 degrees flat angle light illumination provides additional ambient light • Provides even and soft light distribution without glaring • Inbuilt switch can easily turn on/off the light • Two-phased switch to adjust the light between blue lighting and cool white lighting to meet your different demand. • Memory function means if it is turned off when the blue setting is on, then it will come back with the same setting when it is turned on again. • Surface screw mounting design, caps provided to cover the screws which will leave a clean finish after installation • Long life span reaches 50,000 hours • Easy installation, surface mounted • Weight: 160g • Dimension: 250X108X18.5mm
-
LED Square Crystal Section light with the push-button operation. Stylish polished metalised reflector for a consistent and exceptional interior providing optimum illumination. Operating on 12-volt power, it is the perfect ceiling light for any caravan or motorhome. Features:
- Design with both illuminative and decorative purpose
- Clear PMMA lens with frosted part to optimize the beam
- Blue mode light for night application
- Three levels of brightness setting
- Highly polished screw caps and switch
- Memory function for convenient control
- Efficient heat dissipation for stable performance
- 10-15 volts DC
-
Operating voltage: 12V DC • Lighting color: Cool White and Blue • Luminous flux: 550/1100 lumens • Low power consumption: 7.4/14.8W, 0.58/1.16A • Convenience for on/off • 120 degrees flat angle light illumination provides additional ambient light • Provides even and soft light distribution without glaring • Surface screw mounting design, caps provided to cover the screws which will leave a clean finish after installation • Long life span reaches 50,000 hours • Easy installation, surface mounted • Weight: 250g • Dimension: 400X190X18.5mm
-
The CBE CB522 12V Battery Mains 230V Charger is a sophisticated charging solution, tailored for motorhome, caravan, and boating sectors. This Switch Mode Battery Charger is capable of charging 12V gel or lead-acid batteries automatically. Its continuous connection capability and the high-frequency switching technology ensure a reduced size and weight, while delivering higher performance. The charger operates in four stages: maximum current charging until the end-charge voltage is reached, a prolonged operation at the end-charge threshold, constant voltage holding, and switching to Stand-by mode after 10 hours, reactivating only when the voltage drops below 13V. This versatile and efficient charger is a must-have for maintaining your 12V batteries in peak condition. The charging process takes place in four stages: 1) Battery charging with maximum current until the end-charge voltage is reached. NOTE: the end-charge voltage can only be reached if the battery is fully efficient. 2) When the end-charge threshold is reached the battery charger continues to operate for 90 minutes (lead-acid batteries) or 8 hours (lead-gel batteries) with constant voltage. 3) Constant voltage holding at 13.8 V (gel batteries.) or 13.5 V (lead acid batteries.). 4) After 10 hours, the battery charger switches to the Stand-by mode and begins to charge again only when the battery voltage is lower than 13 V.
-
The CBE Distribution Box 12v DS450-AN is a high-quality solution, widely used in Australian-built motorhomes. This distribution box is supplied with fuses, ensuring safe and efficient distribution of power throughout your vehicle. It's a crucial component for anyone looking to manage electrical systems in motorhomes effectively. The DS450-AN is manufactured by a trusted supplier, offering reliability and peace of mind for your electrical needs. This distribution box is an essential item for maintaining organized and safe electrical systems in any RV or motorhome.Manufacturer number: 205210
-
The CBE Distribution Box 12v DS450-KT is a high-quality power distribution solution, highly valued in Australian-built motorhomes for its reliability and efficiency. This box plays a critical role in managing power distribution effectively, equipped with fuses for enhanced safety and optimal performance. Its robust design and compatibility with a variety of electrical setups make it an indispensable choice for any motorhome owner seeking to easily and effectively manage and organize their power systems.Manufacturer number: 209456
-
The CBE Distribution Box 12v DS520-AN is a high-quality power distribution solution, highly valued in Australian-built motorhomes for its reliability and efficiency. This box plays a critical role in managing power distribution effectively, equipped with fuses for enhanced safety and optimal performance. Its robust design and compatibility with a variety of electrical setups make it an indispensable choice for any motorhome owner seeking to easily and effectively manage and organize their power systems.Manufacturer number: 205211
-
Introducing the CBE CB522-LT, a cutting-edge lithium 12V battery charger designed for maximum efficiency and safety. This charger employs an automatic charging system that operates in four distinct phases: Bulk, Absorption, Float, and Refresh. The Bulk phase charges the battery with maximum current until the end-of-charge voltage is reached. Absorption completes the charging at a constant voltage. The Float phase maintains the battery at a constant voltage of 13.5V for up to 240 hours, and the Refresh phase recharges the battery to 14.5V. This cycle ensures your lithium battery remains in optimal condition, adapting to varying power needs. The CB522-LT's advanced technology caters specifically to lithium batteries, providing a tailored and safe charging process. It's an ideal choice for those seeking a reliable, high-performance lithium battery charging solution. Automatic charging system takes place in four phases: Phase 1: Bulk – The battery is charged with maximum current until the end-of-charge voltage is reached. Phase 2: Absorption – Battery charging is completed with constant end-of-charge voltage for a maximum time of 1h (or 30 minutes with I<5A). Phase 3: Float – Maintenance charging at a constant voltage of 13.5V for a maximum time of 240 hours. The cycle is resumed from the bulk phase if battery voltage drops below 12.7V after a high load has been switched on. Phase 4: Refresh – The battery is charged to the voltage of 14.5V for a maximum time of 30 minutes (or up to I<5A). Afterwards, the charge restarts from the float phase.
-
The Dometic SC1230 Solar Controller is an advanced 30A solar charge controller, compatible with a range of battery types including sealed, gel, and flooded. Ideal for caravans, motorhomes, and 4x4 vehicles, this controller is equipped with intelligent PWM solar charging, twin USB ports, and various load control modes. Its intuitive LCD display provides critical information, ensuring optimal charging. The SC1230 is designed to manage solar energy efficiently, making it an invaluable tool for those relying on solar power. Its ease of use, coupled with a robust feature set, makes it a top choice for effectively harnessing solar energy in diverse environments. Features:
- 3 stage intelligent PWM solar charging
- Twin USB ports
- Low voltage disconnect
- Suitable for use with a range of battery types
- Informative backlight LCD display
- Operating temperature range of -25˚C - +55˚C
- Multiple load control modes
-
The Camec Outdoor Annexe Mat (7m x 2.5m) is an ideal addition to any caravan or motorhome, enhancing both comfort and functionality. This matting features an attractive two-tone weave, providing a warm, non-slip finish. It's designed to allow air circulation while preventing insects from coming through. Easy to clean and hemmed for extra strength, it comes with pegging eyelets to prevent tripping. The breathable fabric ensures the grass underneath does not die, and it's also bug-resistant. Exceptionally hard-wearing, rot-proof, and UV stabilized, this matting is easy to maintain – just hose it down.
-
Elevate your RV and caravan experience with the Apex Valves Tempering Valve HEAT155012-IP. Crafted for meticulous temperature regulation, this valve ensures a safe and consistent water temperature at all times, reducing scalding risks when you're showering, washing your hands or doing the dishes. With easy-to-clean mesh filter seals, this valve is also lightweight and easy to install, offering an efficient and dependable performance for every adventure. Upgrade your water system and ensure your safety today. Features:
- Fast installation times
- Lightweight and easy to install
- Easy-to-clean mesh filter seals
- Simple to service
- Pre-set 50 degrees celsius
- AS/NZ 4020 (Water contract approval
- Cold water supply temperature: 5 - 25 degrees
- Hot water supply temperature: 55 - 80 degrees
- Minimum flow rate: 5 Litres per minute
- Set temperature: 50 degrees
- Accuracy of outlet temperature: +/- 3 degrees
- Maximum Working Pressure (static): 16 Bar (1600Kpa)
- Maximum Working Pressure (dynamic): 5 Bar (500Kpa)Apex part number: HEAT155012-IP
-
A retractable slide-out awning protects your slide-out from debris, fallen twigs, leaves, droppings, inclement weather and also insulates against the sun. It reduces heat and adds value to your vehicle. Choose from one of our standard lengths in white. Requires flat roof along the length of the slide out and 15mm clearance on the edge of the roof for mounting. CHOOSE YOUR SIZE FROM THE DROP DOWN MENU ABOVE!
Features:
- Fresh white colour
- Retracts automatically with the slide-out
- Automatically tensions when extended
- Roof mounted
-
Remove any unwanted odours and fumes from your kitchen quickly and efficiently. The sleek integrated flush mount rangehood is perfectly suited to the RV's, caravans and motorhomes. Featuring easy-access tempered glass touch control front display, digital display, 3 speed extractor fan, washable filter, twin LED strip lights, stainless steel body, rear air outlet with a sleek black design.
Features:
- 465mm width
- Tempered glass touch control panels
- Digital displays
- Twin LED lights
- Stainless steel body
- 3 speed extractor fans
- Washable filters
- 12-month warranty
- Dimensions (W x H x D): 520 x 115 x 230mm
-
Axis' AX1922 22-inch HD LED TV is more than just a TV; it's an experience. Tailored for boats, caravans, RVs, and other mobile setups, it's meticulously crafted to resist external elements like moisture, dust, and vibration. Enjoy a plethora of media inputs and control live TV with PVR and time shift functions. With HD-ready support, it promises impeccable visuals, making every frame come to life. For those who demand nothing but the best, the Axis AX1922 stands as the benchmark. Upgrade your setup and enjoy unmatched entertainment today.
Specifications
PANEL- Display Size: 22” (56cm)
- High Definition LED TV
- Aspect Ratio: 16:9
- Resolution: 1920 x 1080
- Brightness: 220cd/m2
- Contrast: 3000:1
- Viewing Angle: 178(H) x 178(V)
- Input: 9-36V DC / 4A @12V
- Optional AC Adapter: 240V 50Hz/60Hz
- Stand-by Power Consumption: 0.5W
- MPEG-4 Video System
- OSD: Multi-languages
- Number of Channels: 99
- Comb Filter: 3D
- Teletext: ATV/1000 Pages
- Speakers: 2 x 3W Stereo
- Conformal Coated Circuit Board
- Size: 506 x 49 x 301 mm
- Enhanced Strength 100 x 100 VESA Mounting
- Net weight: 3.8 kg
- DVB-T Digital HD Tuner
- Analogue Tuner
- DTV Video System: MPEG-1MP@ML, H.264, MPEG-4 (Video Codes)
- DTV Sound System: MPEG-1 Layer 1/2
- ATV Video System: PAL
- ATV Sound System: BG, DK, I
- Built-In DVD Player
- Supports DVD/VCD/CD/MP3/DIVX/JPEG
- Supports DVD±R/DVD±RW/CD-R/RW
- RF/Antenna: 1
- HDMI: 2
- USB: 1
- Mini YPbPr: 1
- Mini AV: 1
- VGA: 1
- PC Audio: 1
- Headphone: 1 (3.5mm)
- Digital Coax: 1
- Line Out: 1
- TIMESHIFT: Pause, Rewind & Fast-Forward Live TV (using PVR)
- USB Reader
- PVR (Personal Video Recorder)
- EPG (Electronic Program Guide)
- Remote Control
- Cig. Power Adaptor Lead
- Wall Mounted Screws
- Mini YPbPr Lead
- Mini AV Adaptor
- Desk Mount Stands (Feet)
- 240V AC Adaptor
- Range of AXIS TV Mounting Brackets
-
The Victron Battery Protect 12/24v 65A is an indispensable safeguard for your battery system. It prevents complete discharge or insufficient power for cranking engines, crucial for the longevity and functionality of your battery. This device expertly manages the current direction, either to a load or from a charger, enhancing the battery's efficiency. Its uni-directional nature ensures that it can be used in various applications, making it an essential tool for those reliant on battery power. Whether for recreational vehicles, marine applications, or remote power systems, this Battery Protect ensures your battery's health and prolongs its life, providing peace of mind in all your adventures. Victron Number: BPR000065400
-
The Fusion® EL Series Marine Speakers 6.5" 80-Watt Classic Black (Pair) are designed for superior audio performance in harsh marine environments. These speakers have an IP65 rating, ensuring dust and water resistance, and are salt fog and UV stable. Featuring an injection-moulded polypropylene cone for clear sound reproduction, these speakers are ideal for boat owners seeking quality and durability. Their open basket construction allows for extended power handling and versatile mounting options.
DESIGNED AND ENGINEERED FOR THE MARINE ENVIRONMENT
The EL Series speakers have an IP65 rating for protection against dust and water ingress and have been tested to a high level of protection against salt fog and UV.
DESIGNED TO COMPLY WITH ISO12216
Tested to international standards for pressure and water ingress, the EL Series speakers are designed and built for superior quality and robustness.
QUALITY MATERIALS AND ACOUSTIC ENGINEERING
The EL Series speakers incorporate high-quality materials and marine-specific design elements, ensuring they look and sound great on the water.
INJECTION-MOULDED POLYPROPYLENE (IMPP) CONE
A translucent, water-resistant IMPP cone improves the robustness and durability of these classic marine speakers, allowing for clean, clear audio reproduction.
LIGHTWEIGHT VOICE COIL
The lightweight design allows for higher sensitivity, resulting in increased power and efficiency to deliver an enhanced audio experience.
OPEN BASKET CONSTRUCTION
The optimised open back design allows for extended power handling and versatile mounting options with reduced mounting depth.
General
Physical dimensions (Diameter x Depth) 6.93″ x 2.26″ (176 x 57.5 mm) Water and dust rating IP65 Configuration Full range Speaker size 6.5″ Peak power (Watts) 80 W RMS power (Watts) 20 W Sensitivity (1 W / 1 m) 91 dB Frequency response 45 Hz-16 kHz Nominal impedance 4 ohms Recommended amplifier power (RMS) 20-40 W/Ch Operating temperature range 32° to 122° F (0° to 50° C) Voice coil diameter 0.79″ Cone material Polypropylene cone with cloth surround Compass-safe distance 100″ (254 cm) Warranty 1 year Mounting dimensions
Kit Contains:Mounting diameter clearance 5.12″ (130 mm) Mounting depth clearance 1.69″ (43 mm) - One pair of speakers (based on what you select)
- 12 Phillips stainless steel mounting screws (4.2 mm x 25.4 mm (8 gauge x 1″))
- Two 20 ft (6 metre) speaker cables
- Documentation
-
The Victron BMV-712 Battery Monitor with Bluetooth is a state-of-the-art device, ready for the Internet of Things (IoT) era. It allows for wireless communication between products, simplifying system installation and enhancing performance. The monitor connects to the Victron Bluetooth app, enabling users to customize settings, monitor data, view history, and update software. It's easy to install and includes all necessary components, making it an ideal choice for anyone looking to enhance their battery monitoring capabilities. Bluetooth inside With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance. Download the Victron Bluetooth app Use a smartphone or other Bluetooth enabled device to: - customize settings, - monitor all important data on single screen, - view historical data, and to - update the software when new features become available. Easy to install All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ12 cable (10 m) and battery cable with fuse (2 m); no other components needed. Also included are a separate front bezel for a square or round display appearance, a securing ring for rear mounting and screws for front mounting. Victron Number: BAM030712200
-
The Bromic Waterboy 12 volt Diaphragm water pump is capable of distributing an 11 LPM water flow across many caravan, or RV vehicles, as well as various agriculture and recreational uses. Featuring a constant speed pump with a 55 PSI (3.8 BAR) rating with a self priming height of 1.8m. Included is soft noise absorbing mounting feet with an inline filter and two (2) ½” Barb fittings. Comes complete with our 2 year replacement warranty.
Features and Benefits:
- 11 LPM 12V DC water pump
- Self priming (1.8,)
- Low power draw of 7.5 Amp
- Shut off pressure at 55 PSI
- 4 Chamber delivers quiet smooth operation
- Runs dry without damage
- Easy connecting system
- Corrosion resistant valves
- Includes accessories
- Filter / strainer
- 2 x 1/2” Barb hose fittings
Specifications:
- Part Number: 9320688218759
- 2 Years Replacement Warranty
- Rated Voltage (V/50Hz): 12
- Max. Current (A): 7.5
- Water Type: Clean
- Outlet Connection: Male
- Outlet Connection Thread Size: 1/2"
-
For an impeccable, scratch-free clean, the Premier One 10" Quad 4 Sided Brush Head is the ideal accessory for your RV cleaning arsenal. This brush head boasts ultra-soft, non-abrasive fibers ensuring thorough cleaning without damaging your RV's paintwork. Designed to be compatible with both the Premier One Flow Through Pole and the Premier One Non-Flow Pole, it guarantees reach in those challenging nooks and crannies. With a brush head width of 26cm, attach it to any standard thread cleaning pole and witness a seamless cleaning experience. WE ALSO SELL THE FLOW-THROUGH POLE IN OUR STORE, PART # SP0163
-
The Camco Caravan Awning Privacy Screen offers the perfect blend of privacy and outdoor experience for your 17ft awning. Tailored to fit both box and rollout styles, this caravan awning privacy screen is 4.9m x 1.8m of 230gsm monofilament fabric, providing a robust 90% shade and superior UV block. Its steel grey hue merges seamlessly with any RV design, and with the ease of sliding into the awning's rope track, you're moments away from enjoying your personal, airy space. Whether you peg it down for a cozy annex feel or angle it out for an open, breezy atmosphere, the included pegs and elastic tie-downs offer versatile setup options. Delivered in a handy carry bag and backed by a 1-year warranty, this privacy screen is an essential for any caravan enthusiast.
Set Up
Setting up a privacy screen for a rollout awning is quick and easy. You simply slide the screens spline along the rope track of your Awning Barrel or Lead Bar. Once in position you peg down the bottom side using guy ropes or elastic shock cords. You can adjust the pitch/angle of the screen when pegging to suit your location. Pegging straight down provides a more private sheltered feeling much like an annex. Pegging out at a greater angle gives a more spacious airy feel in nice weather.Features
- Suits Fiamma, Carefree and Dometic awnings
- Slides into existing rope track of awnings
- 90% Shade and UV Block
- Stainless steel D-Rings are stitched and re-enforced at each lower corner.
- Pegs and elastic tie downs included
- Tape is lock-stitched around edge for durability
- Monofilament is 230gsm
- Colour is Steel grey, to blend in with all awning and caravan colours
- Mean Ultraviolet Protection Factor: 13-41, (AS/NZS 4399)
- Supplied in a lightweight carry bag
- 1 year warranty.
Specifications
- Model: 050271
- Brand: Camec
- Barcode: 9339051006541
- Dual rope track - 5mm and 7mm
- 4.3m long
- 1.8m high
- 4 x tie down D-rings along base
-
Step up your RV care regime with Camco's Pro-Strength Wash & Wax, a superior blend of natural waxes and emulsifiers that promises to clean, shine, and protect in one effortless step. Without the need for buffing, its 100% Carnauba Wax content creates a resilient, water-resistant surface that exhibits excellent beading properties. This formula is perfectly safe for all finishes, effectively removing unsightly mold stains, dirt, tree sap, and road grime. Whether you're looking to refresh your awning or give your caravan a gleaming finish, this Wash & Wax, available in a 946ml bottle, is your go-to solution, delivering remarkable results on a variety of materials including vinyl, nylon, acrylic, and fabric.
-
Introducing the Camec 12v Range Hood, the ultimate addition to any modern RV. With its stainless steel finish, this flush mount range hood combines style with utility. Powered by robust twin 2-speed extraction fans and illuminated by custom LED lighting strips, it guarantees good visibility and a smoke-free cooking experience. The inclusion of removable filters ensures easy cleaning and maintenance, an essential for life on the road. If you're looking for a robust and practical range hood for your caravan or RV, look no further than the Camec 12v Range Hood.
Warranty 1 Year Power 12V Dimensions Mounting Cavity: 465mm(w) x 187mm(d) x 53mm(h), External Body: 518mm(w) x 228mm(d) x 15.6mm(h) -
Ensure your outdoor leisure remains private with this Camec caravan privacy screen. This caravan privacy screen is designed to effortlessly attach to your roll-out awning, creating a secluded area for you and your companions. Measuring 2.1m by 2.0m, it's crafted to provide a remarkable 90% shade and UV protection, ensuring comfort during those bright, sunny days. Complete with four Velcro hook & loop tabs and durable stainless steel D-rings, it promises a secure fit and easy installation. Plus, the screen's neutral "Steel Grey" tone complements any caravan aesthetic while the included tie-down ropes and pegs mean setup is a breeze. Revel in privacy, shade, and UV protection, all with the stylish Camec Awning Privacy Screen End.
-
Features Stylish ergonomic handle design for easy grip that is salt water & UV protected Includes 42 LED cool white illumination light, soft blue LED night light, glow in the dark switch and optional output to activate a step light. NOTE: When installing, do not connect the white wire unless it is being connected to a step light. If required, refer to details for electrical wiring connection.Glow in the dark switch cover for easy location of the handle at night.Press switch to turn the blue night light on, press again to activate main white LED.
-
Features Stylish ergonomic handle design for easy grip that is salt water & UV protected Includes 42 LED cool white illumination light, soft blue LED night light, glow in the dark switch and optional output to activate a step light. NOTE: When installing, do not connect the white wire unless it is being connected to a step light. If required, refer to details for electrical wiring connection.Glow in the dark switch cover for easy location of the handle at night.Press switch to turn the blue night light on, press again to activate main white LED.
-
The Control Panel PC320KT is a multifunctional and essential component for many motorhomes, offering comprehensive control over various functions including mains control, battery test, tank test, radio, lights, and clock. This panel plays a crucial role in the vehicle's system, ensuring smooth and efficient operations. Its user-friendly interface allows for easy monitoring and control, making it an indispensable tool for motorhome owners. Whether you're on a short trip or a long adventure, the PC320KT provides the necessary information and control at your fingertips, enhancing the overall experience and safety of your journey. Its reliability and comprehensive features make it a key component in the maintenance and enjoyment of your motorhome.
-
The Camco Smoked Black RV Jensen Lid Vent Hatch Cover 14 x 14 is a top caravan hatch door for caravan owners seeking both functionality and style. UV stabilised and impact resistant, this hatch cover ensures durability against the elements. It features a rust-resistant, galvanized mounting hardware and a self-centering device for perfect alignment in the roof opening. With standard radius corners and a screen that allows air flow while keeping insects out, it's both practical and user-friendly. The hatch is easy to install, fitting any Jensen style vent with a 14 x 14 inch roof opening. Made with a metal base and a white UV resistant acrylic lid, it accommodates various roof thicknesses, making it a versatile addition to your caravan.
-
The Camco White RV Jensen Lid Vent Hatch Cover 14 x 14 is a caravan hatch cover that offers a perfect blend of practicality and sleek design for caravan enthusiasts. This UV-stabilised and impact-resistant hatch cover is built to withstand the rigors of the road. It comes pre-assembled with rust-resistant, galvanized mounting hardware and features a self-centering device for hassle-free installation. The hatch cover, designed with standard radius corners, allows airflow while its screen keeps insects out, ensuring a comfortable interior environment. Suitable for any Jensen-style vent with a 14 x 14-inch roof opening, it is easy to install and check for the 3-hinge setup. The hatch's metal base and white UV-resistant acrylic lid can accommodate a variety of roof thicknesses.
-
Introducing the Thetford Stainless Steel Kitchen Centre and caravan kitchen sink - the epitome of space-saving luxury. This complete set, encompassing a plastic wash bowl, chopping board, and draining essentials, seamlessly fits within the stainless steel sink, offering a compact solution to your kitchen needs. Topped with a smoked black glass lid, this kitchen centrepiece pairs beautifully with classic steel cookware, making it an RV essential. Upgrade your RV kitchen and enjoy better meal times with one of the industry's leading names.Why choose the Stainless Steel Kitchen Centre?
- To complement classic steel cookware
- Bowl dimensions (HxWxD): 153 x 360 x 470mm
- Bowl capacity: 9.5L
-
Ensure safe and easy maneuvering with the Safety Dave Square Camera 5.8" Caravan Reversing Camera System. This comprehensive caravan reversing camera system includes a 5.8” LCD screen with a sun shield to reduce glare, ensuring clear visibility under various lighting conditions. The fully waterproof eyeball camera not only provides excellent visibility but also includes audio, video, and infrared night vision capabilities, enhancing safety during night-time reversing. The package comes with a 15-meter and a 7.5-meter 4-pin cable, both waterproof and equipped to carry audio, video, and power. Additionally, the suction mount allows for versatile placement on your dashboard or windscreen, and the monitor can accept a second video input, offering flexibility for various setups. This system is ideal for caravan owners seeking a reliable, high-quality solution for reversing and parking in tight spaces.The package includes:
- A 5.8” LCD screen with sun shield to reduce glare.
- An eyeball camera – fully waterproof and carries audio, video, and night vision infrared.
- A 15mt 4-pin cable – waterproof, carries audio, video and power.
- A 7.5mt 4-pin cable - waterproof, carries audio, video and power.
- A suction mount – enables you to mount your screen onto the dashboard, connects to the windscreen or any other area that allows the cup to work
-
The Quell Carbon Monoxide Alarm is a vital safety tool, designed to alert you to dangerous levels of carbon monoxide. The alarm features a flashing green LED that blinks every 30 seconds to indicate proper functioning, and a pulsing red LED that, along with an audible alarm, warns of high carbon monoxide levels. It includes a test button to check functionality and a memory reset feature after the alarm has sounded. The device automatically activates upon attachment to the mounting bracket, making installation straightforward and user-friendly. This alarm is an essential device for any home or RV, providing critical protection against the often undetectable threat of carbon monoxide poisoning.
-
The CBE CB516 is a versatile 16 Amp Switch Mode Battery Charger, designed to efficiently charge 12v lead acid batteries. This charger features advanced protection against overheating, short circuits, and polarity reversal, ensuring safe and reliable charging. The high-frequency switching technology incorporated in this charger provides enhanced performance levels. Its straightforward operation allows for automatic battery charging, making it an ideal choice for those seeking a hassle-free charging solution. Whether for routine maintenance or emergency charging, the CBE CB516 stands out for its safety features and efficient charging capabilities.
-
The Control Panel PC380-AN is a comprehensive digital LCD control panel, designed for optimal efficiency and convenience in managing your vehicle's systems. It features a 12V main switch with an LED indicator, pump switch, light switch, and displays for temperature, clock, and fresh water. Additionally, it includes a flashing waste water full display and a 230V control display, along with a battery voltage display. This panel is integral for a comfortable and informed journey, allowing for seamless control and monitoring of various vehicle functions. Its user-friendly interface and comprehensive features make it an ideal choice for efficient vehicle management. Use with DS520-AN Distribution Box, also available in our store.
-
The Control Panel PC380-KT is a comprehensive digital LCD control panel, designed for optimal efficiency and convenience in managing your vehicle's systems. It features a 12V main switch with an LED indicator, pump switch, light switch, and displays for temperature, clock, and fresh water. Additionally, it includes a flashing waste water full display and a 230V control display, along with a battery voltage display. This panel is integral for a comfortable and informed journey, allowing for seamless control and monitoring of various vehicle functions. Its user-friendly interface and comprehensive features make it an ideal choice for efficient vehicle management. Use with DS520-KT Distribution Box, also available in our store.
-
Revolutionize your Caravan or RV's electrical system with the CMS Double Power Point – Double Pole – White. This double pole, double power point is specifically designed for 240V CMS cable connections, offering a secure and efficient electrical solution. Its white color adds a touch of elegance to any interior. The product extends 32mm into the wall and requires cables to be at least 300mm longer than the distance between power points for optimal installation. This power point is exclusively compatible with related CMS cables, ensuring a safe and tailored electrical setup. Its dimensions of 130mm x 72mm make it a compact and practical choice for space-conscious installations. Features
- These can only be connected with related CMS cables.
- 1 year warranty.
- Model: 500-04400, J17.2NW
- Brand: CMS
- Overall size is 130mm x 72mm
- J series (used in Jayco and Avida)
-
CMS products provide a DIY 240V wiring solution for your RV. This is a connecting cable that fits all J series CMS products. It comes in various lengths as shown in the title. Each cable has a female and male end so they cannot be connected incorrectly. Each connection has a security clip that can only be separated by manual manipulation, they will never come adrift within the wall provided they are pushed tight until the clip engages. The rating of the cables exceeds the 15amp supply provided to RV's. The number of cables and power points should be limited to either 10 double power points or 12 single power points per circuit, however your electrician may vary this depending of expected loads. For example an electric stove would reduce this number. In any event the circuit will be physically limited to 16amps by the 16amp circuit breaker. Cables should be longer than the distance between power points. As a general rule allow 300mm extra, but even more will not harm. Remember the cables clip in facing down from the power point within the wall, so branching off to a power point above will require curving the cable back up. Cables can be joined using a CMS double adapter. See dimensions of double adapters. Each cable end has a cross section of 25mm x 16mm. Image shown is of a 3000mm cable. The licensed electrician will cut the first cable to insert the 16amp double pole circuit breaker or 16amp RCD as well as connect the earth wire to the chassis. Cables should not be placed near any sharp edges which may damage the outer sheath. 240V outlets cannot be placed within certain distances of a shower or bath, your electrician can advise. Ensure cables are securely clipped together and inspected by your electrician before completing cladding. If running power below floor to the other side of the RV it must be enclosed within the chassis or conduit. Features
- 1 year warranty.
- Model: 500-03700, JL05BG
- Brand: CMS
- Length: 500mm
- Rated to 20amp
- J series (used in Jayco and Avida)
-
The CMS Power Inlet, 15A – White (Male) is an essential component for a DIY 240V wiring solution in your RV. This 10amp power outlet, designed for CMS 240V cables, is typically the last outlet in a circuit as it doesn't offer a secondary connection. It features an automatic switch that cuts off current when an appliance is disconnected, ensuring safety and efficiency. The inlet requires 60mm of space from the mounting face to the rear wall and may extend into the cabin for thinner walls. Its dimensions are compatible with Jayco and Avida series, and it comes with a 1-year warranty. Features
- These can only be connected with related CMS cables.
- 1 year warranty.
- Model: 500-04312, JIL15WT
- Brand: CMS
- J series (used in Jayco and Avida)
-
The CMS Mounting Shroud – White offers a sleek, protective solution for your power installations. This shroud is designed for situations where power points exceed the wall recess, requiring a protective cover behind the wall. It's especially useful in areas like wardrobe interiors, where cables are exposed. The shroud ensures safety and neatness, covering the rear of both double and single CMS power points effectively. With dimensions of 137mm x 137mm and extending 30mm, it provides ample coverage without being obtrusive. Its white color seamlessly integrates with your interior design, maintaining a clean and professional look. This product comes with a 1-year warranty, ensuring quality and reliability. Features
- 1 year warranty.
- Model: 500-04284, J16CWT
- Brand: CMS
- Measures 137mm x 137mm, and extend 30mm.
-
Opt for the CMS Power Inlet, 15A – Black (Male) for a secure and efficient power source in your RV. This DIY 240V, 15amp power inlet is an essential part of the CMS wiring solution, fitting perfectly with CMS cables. It requires connection to a CMS circuit breaker before any outlets, ensuring maximum safety. The power inlet's sleek black design adds a modern touch to your setup. It needs 60mm of space from the outside mounting face to the rear, adaptable for various wall thicknesses. With a 1-year warranty and compatibility with Jayco and Avida series, this power inlet is a reliable and stylish choice for your electrical needs. Features
- These can only be connected with related CMS cables.
- 1 year warranty.
- Model: 500-04313, JIL15BK
- Brand: CMS
- J series (used in Jayco and Avida)
-
The CMS Power Outlet With Auto Switch, 10A – White (Female) is a sophisticated and safe solution for your RV's electrical needs. This DIY 240V, 10amp power outlet is designed to fit CMS cables, offering a reliable and specialized connection. The automatic switch feature cuts off current to ensure safety when appliances are disconnected. It requires 60mm of space from the mounting face to the rear wall, making it suitable for various wall thicknesses. The screw holes are strategically placed for easy installation. This outlet is part of the J series, used in Jayco and Avida, and includes a 1-year warranty for peace of mind. Features
- These can only be connected with related CMS cables.
- 1 year warranty.
- Model: 500-04310, JOL10WT
- Brand: CMS
- J series (used in Jayco and Avida)
-
The CMS Mounting Block, designed exclusively for beige CMS DIY 240v power points, is an essential accessory for your electrical installations. This power point mounting block is ideal for situations where power points cannot fully recess into the wall. It accommodates both double and single CMS power points, offering versatility for various electrical setups. The mounting block allows external cable connections, typically safeguarded within a conduit that aligns with the block's lower face. It features three accessible entry points at the bottom and one on each side, facilitating easy cable entry and secure attachment to the power point. The CMS Mounting Block is not only functional but also aesthetically pleasing, blending seamlessly with your interior decor. It comes with a 1-year warranty, ensuring reliability and customer satisfaction. Features
- 1 year warranty.
- Model: 500-04200, JMBBG
- Brand: CMS
- Dimensions (w)135mm x (h)105mm x (d)35mm
-
The CMS Mounting Block, designed exclusively for beige CMS DIY 240v power points, is an essential accessory for your electrical installations. This power point mounting block is ideal for situations where power points cannot fully recess into the wall. It accommodates both double and single CMS power points, offering versatility for various electrical setups. The mounting block allows external cable connections, typically safeguarded within a conduit that aligns with the block's lower face. It features three accessible entry points at the bottom and one on each side, facilitating easy cable entry and secure attachment to the power point. The CMS Mounting Block is not only functional but also aesthetically pleasing, blending seamlessly with your interior decor. It comes with a 1-year warranty, ensuring reliability and customer satisfaction. Features
- 1 year warranty.
- Model: 500-04200, JMBBG
- Brand: CMS
- Dimensions (w)135mm x (h)105mm x (d)35mm
-
Enhance your electrical setup with the CMS Single Power Point – Double Pole – White, a key component for Caravan or RV owners. This product is a double pole, single power point, designed for exclusive use with 240V CMS cables. Its sleek white finish complements any interior design. It extends 32mm into the wall, and for thinner walls, it can be paired with a mounting block or shroud for a seamless installation. This power point's compatibility with specific CMS cables ensures a safe and efficient electrical connection. Its dimensions are 130mm x 72mm, making it a compact and convenient choice for any space. Features
- These can only be connected with related CMS cables.
- 1 year warranty.
- Model: 500-03602, J16.1NW
- Brand: CMS
- Overall size is 130mm x 72mm
- J series (used in Jayco and Avida)
-
The Dometic PerfectView RVS 545 is a state-of-the-art colour reversing camera system, designed to enhance safety and convenience in caravans and RVs. Featuring a flat 5″ LCD monitor with super-bright LED backlighting and AHD technology, it offers outstanding image quality. The system supports up to three cameras and includes a small, discreetly housed color camera. It boasts features like a temperature-controlled heater, normal or mirrored picture function, and automatic recognition of a trailer camera. This system is a perfect blend of advanced technology and user-friendly design.
-
The Truma Cowl Grill for Hot Water System in Cream is an essential component for your Truma gas/electric hot water systems. As a genuine part, it guarantees compatibility and performance. Its cream color complements the aesthetic of your system, and its design ensures it functions effectively. The availability of the outer cover in the store offers a complete solution for your hot water system's exterior needs. RV Spares Online provides this cowl grill as a testament to their commitment to offering genuine, high-quality parts for your RV.
-
The Victron Orion-Tr Smart DC-DC Charger is a professional, adaptive 3-stage charger with built-in Bluetooth, designed for use in dual battery systems in vehicles or boats. It efficiently charges the service battery using the alternator and start battery, can be monitored and programmed via Bluetooth, and features a remote control option. This charger is suitable for both lead acid and lithium batteries, handling high temperatures and offering a full-rated output up to 40°C, making it a versatile and reliable choice for managing your charging needs. Victron Number: ORI121236140
-
Complete your RV roof restoration with Dicor's Acrylic Roof Coating Part 2, the final step in a two-part system designed to renew and protect your rubber roofing. This high-solids acrylic elastomer coating offers superior weatherability, UV resistance, and flexibility, ensuring your RV's roof remains in top condition. Suitable for EPDM rubber & PVC roofing, it requires prior application of Dicor’s Cleaner/Activator for best results. With easy application and exceptional protective qualities, Dicor's Acrylic Coating is essential for extending the life and enhancing the appearance of your RV roof. Two coats are required.
For use on:
EPDM rubber & PVC roofing: Dicor’s Part 1 Cleaner/Activator Primer (RP-CRP-Q) is required prior to coating.Preparation:
Thoroughly mix the contents for a minimum of 5 minutes prior to application. Use plastic sheeting to protect sidewalls and end caps of units. Be sure plastic runs to the ground/floor. EPDM and PVC roof surface must be cleaned/primed with Dicor’s Part 1 Cleaner/Activator (RP-CRP-Q) and free of residue or loose particles. Surface shall be completely dry and frost free before coating. Deteriorated or damaged substrates shall be repaired or replaced.Weather Precautions:
Dicor Acrylic Coating requires complete evaporation of water to cure. Cool temperatures and high humidity may slow down the curing process. Do not apply if weather conditions will not permit complete cure before rain, dew or freezing temperatures occur. Dicor Acrylic Coating will freeze and become unstable at temperatures below 32° F within a 48 hour period after application.Application:
Be sure the Part 1 Cleaner/Activator Priming process is complete prior to applying acrylic coating. Coating may be applied by medium nap roller or brush. Dicor Acrylic Coating shall be applied in a minimum of 2 coats at a rate of 1 gallon/125 sq. ft. per coat (i.e. 8’ X 30’ roof takes 4 gallons). Actual gallons required will depend on the type of surface, texture, method of application and weather conditions at the time of application. All surfaces must be uniformly coated and free from voids, pinholes, or blisters. Entire coating process MUST be completed in one day, including Part 1 Cleaner/Activator and two coats of Acrylic Coating, each dry to the touch before proceeding. Caution: Keep out of reach of children. -
Dicor Self-Leveling Lap Sealant creates a secure, secondary seal over and along the roof edges, vents, hatches, solar panel brackets and screw heads. Suitable EPDM, TPO and PVC membranes, it adheres to aluminum, mortar, wood, vinyl, galvanized metal, fiberglass and concrete.
- This sealant makes a very nice self levelled finish on roofs - not suitable for walls
- This sealant makes it possible to create a continuous seal yet remain flexible.
- May be painted over after outer skin has formed.
- Clean surface of all dirt, loose paint, rust, oil and grease.
- Allow surface to dry before applying sealant.
- Use standard caulking gun or pumping system to apply sealant.
- In cold weather, warm container at room temperature before use.
-
The Tufflex PVC Roofing is a non-fleece backed PVC material that is puncture resistant and tear resistant. Tufflex is flexible with all the advantages of EPDM. We will provide 2 tubs of glue adhesive with this purchase.
- Highly flexible for easy installation
- Tear & puncture resistant
- Remains flexible throughout its lifetime
- Not affected by ponding water
- Sun, weather & chemical resistant
- Easy to maintain
-
Introducing the Dicor Rubber Roof Cleaner Concentrate – the ultimate 3.78L refill bottle designed specifically for RV maintenance. Crafted for EPDM rubber roofing, TPO, vinyl, fiberglass, and other exterior surfaces, this roof cleaner effortlessly lifts dirt and grime while being gentle on your RV. Its special formula includes water-softening agents that tackle hard water spotting, ensuring a spotless and radiant finish. Dicor's Roof Cleaner is safe for routine use and comes recommended for a variety of vehicles, including boats and motorcycles, thanks to its professional strength and biodegradable composition. For optimum care, follow up with Dicor Roof-Gard Roof Protectant to extend the life and look of your RV's roofing. For best results, follow with Dicor Roof-Gard Roof Protectant. IMPORTANT: Some products sold for RV maintenance contain petroleum distillates and citric ingredients. These chemicals will damage your roof membrane and shorten its life. Whether you choose Dicor’s Rubber Roof Cleaner or another brand, be sure the products you use do not contain these harmful chemicals.
- Rinse roof to remove loose dirt.
- Spray directly onto dirty surface area.
- Using a sponge, medium bristle brush, wash mitt or cloth, scrub surface in a circular motion.
- Rinse off with water and allow to dry completely. Repeat if necessary.
- For best results, follow with Dicor Roof-Gard Rubber Roof Protectant.
-
Rejuvenate your RV's aesthetic and ensure it remains in prime condition with the Dicor Roof Renew Kit, expertly engineered for 30 ft. RV units. Our comprehensive package delivers everything required for a full restoration, with clear instructions for easy application. Kit Components Overview: Cleaner/Activator: Unlock the potential of your RV's EPDM roof with our Cleaner/Activator. Its specialized formula transforms the roofing surface, creating an optimal bonding site for the Acrylic Coating. Acrylic Coating: Experience the strength of our high solids acrylic elastomer blend, designed to adapt to your roof's substrate and conditions. Coating Ready Cover Tape: Fortify your RV's roof by seamlessly sealing cracks or tears with our durable, fleece-backed sealing tape. Inclusions: Four gallons of Dicor EPDM Roof Acrylic Coating Two quarts of Cleaner/Activator One 4”x50’ roll of Coating-Ready Cover Tape Metal pan, 9” paint roller, two roller covers Masking tape and detailed instructions SURFACE INSPECTION AND PREPARATION
- Remove heavy deposits of dirt, leaves, pine needles and other debris using a broom or air blower. Any rocks or other large objects should also be removed.
- Roof must be in good condition. Do not apply on pryable or brittle roofing. EPDM surface must be free of standing water, ice, snow, oils or grease at time of application.
- Inspect roof carefully for cracks in the surface. These will need to be repaired later (see Coating Ready Cover Tape).
- EPDM Cleaner/Activator is designed for use on rubber roofing surface only and may damage other exterior parts of RV. It is highly recommended that you secure plastic sheeting over entire sidewalls as well as front and rear end caps to protect them from possible damage. If EPDM Cleaner/Activator contacts any surface other than roof, it should be rinsed immediately.
- DANGER: May cause severe irritation of the eyes and skin, gastrointestinal irritation, nausea, vomiting and diarrhea. May burn muost skin. Prolonged or repeated breathing of vapor or spray mist may be harmful. Use a respirator for protection from vapor or spray mist. Wear chemical resistant gloves, splash proof goggles and rubber overshoes. Avoid eye and skin contact. Do not take internally. Wash thoroughly after handling and before eating or smoking. Keep container closed when not in use.
- EPDM Cleaner/Activator is a ready-to-use material. It can be applied using a Hudson-type agricultural sprayer. Safety glasses with side shields and latex gloves are recommended when transferring EPDM Cleaner/Activator from the shipping container to the sprayer. Spray a fine mist that leaves roof damp. Adjust spray for weather conditions if necessary. If EPDM Cleaner / Activator is running off roof, you have used too much. If using a Hudson sprayer, adjust the spray nozzle to achieve a uniform spray pattern with a 3 to 4 foot arc. Application rate is 125 sq. ft. per quart over new or existing surfaces. Do not apply below 40 degrees F (4 degrees C).
- Allow EPDM Cleaner/ Activator to stand a minimum of 15 minutes to wet out and react with the EPDM surface. For best results, rinse with clean water using a minimum 2,000 psi pressure washer. Begin the power rinse at the lowest point on the roof and work upwards, keeping the pressure washer tip within 12” of the EPDM surface. Once the highest point on the roof is reached, work down again with a final rinse to remove any excess dirt or debris from the roof. After cleaning, the roof should be “white” in color, which is an indication that the surface has been chemically altered. Allow surfaces to dry thoroughly prior to application of two coats of the Dicor Acrylic Coating
- Clean equipment with water and biodegradable detergent. Purge the water from the pump and hoses using Mineral Spirits prior to storing for any length of time.
- Roof must be cleaned with Cleaner/Activator prior to application of Coating Ready Cover Tape.
- Any areas that are torn or cracked may now be repaired using the Coating Ready Cover Tape.
- Peel off a few inches of the release liner and carefully position the Coating Ready Cover Tape before applying. Any attempt to reposition the tape after application will damage the material.
- Apply pressure starting at the center of the tape and working towards the outside edges, removing any bubbles as you go. When finished, the edges should have no tunnels, openings or fishmouths.
- Only apply Coating Ready Cover Tape to areas that are to be coated the same day.
- Using the masking tape provided, mask off roof edging to enable coating to be applied with a clean, straight edge. Also, mask other surfaces where you do not want coating to be applied.
- Dicor White Acrylic Coating must be preceded with Dicor EPDM Cleaner/Activator to ensure proper adhesion (See Cleaner/Activator application). Cleaner/Activator must be removed by power washing prior to application of Acrylic Coating.
- All surfaces must be clean and free of residue or loose particles, degraded substrate, grease, oil, dirt, or other contaminates. Surfaces shall be completely dry and frost-free before coating.
- Dicor Acrylic Coating shall be applied in a minimum of a 2 coats at a rate of 1 gallon per 125 sq. ft. per coat (i.e., 8’X30’ roof takes 4 gallons). Actual gallons required will depend on the type of surface and texture, method of application, and weather conditions at the time of application. All surfaces must be uniformly coated and free from voids, pinholes, or blisters.
- Thoroughly mix the contents for a minimum of 5 minutes prior to application. Dicor Acrylic Coating may be applied by roller (provided) or brush. Dicor Acrylic Coating shall be applied in a minimum of 2 coats at a rate of 1 gallon per 125 sq. ft. per coat (i.e., 8’X30’ roof takes 4 gallons).
- Allow to dry for 12 to 24 hours depending on weather conditions.
-
Protect your RV's rooftop from the relentless sun with Dicor Roof Gard UV Protectant. This 3.78L refill bottle offers a safeguard against the damaging effects of UV rays, water, and dirt. Suitable for various roof types including rubber, vinyl, PVC, TPO, and fiberglass, its mild, non-abrasive formula ensures cleanliness and prolongs surface life without leaving any residue. With a protective finish that repels dust and water, and a composition free from silicone, oils, waxes, glycerin, or petroleum distillates, it's gentle yet effective. Perfect for an array of outdoor gear and vehicles, this product also protects countertops, furniture, and automotive detailing. Follow Rudy’s advice and opt for Roof-Gard to ensure your RV’s roof membrane remains in peak condition without harmful chemical damage.
A Tip From Rudy: Some products sold for RV maintenance contain petroleum distillates and citric ingredients. These chemicals will damage your roof membrane and shorten its life. Whether you choose Dicor’s Roof-Gard or another brand, be sure the products you use do not contain these harmful chemicals.
Directions:
- Clean roof first with Dicor Roof Cleaner.
- Spray directly on to clean surface, out of direct sunlght in 3′ X 3′ sections. One quart treats up to a 40′ RV.
- To provide for even coverage, wipe with soft cloth or sponge mop.
- For MAXIMUM UV PROTECTION reapply every 3-5 weeks or after every cleaning.
-
Keep your RV's roof in immaculate condition with Dicor Rubber Roof Cleaner Concentrate. This 478ml bottle is specially formulated to clean RV EPDM rubber roofs, TPO, vinyl, and fiberglass without harshness. Battle against hard water spots with the cleaner's built-in softening agents and maintain a gleaming surface effortlessly. This cleaner is safe for regular maintenance of all RV roofing and exteriors, and is also suitable for use on boats, personal watercraft, and even automobiles. With its ready-to-use, professional-strength formula, the Dicor Rubber Roof Cleaner is an essential part of your vehicle care routine. For the best results, follow with Dicor Roof-Gard Roof Protectant to give your RV that extra layer of longevity and shine. For best results, follow with Dicor Roof-Gard Roof Protectant. IMPORTANT: Some products sold for RV maintenance contain petroleum distillates and citric ingredients. These chemicals will damage your roof membrane and shorten its life. Whether you choose Dicor’s Rubber Roof Cleaner or another brand, be sure the products you use do not contain these harmful chemicals.
- Rinse roof to remove loose dirt.
- Spray directly onto dirty surface area.
- Using a sponge, medium bristle brush, wash mitt or cloth, scrub surface in a circular motion.
- Rinse off with water and allow to dry completely. Repeat if necessary.
- For best results, follow with Dicor Roof-Gard Rubber Roof Protectant.
-
Shield your RV's roof from the rigors of nature with Roof-Gard RV Roof Protectant, your go-to solution for RV paint protection. This premium protectant offers your vehicle defense against fading, oxidization, drying, and cracking caused by harsh UV rays, water, and dirt. Suited for a range of materials including rubber, vinyl, PVC, TPO, and fiberglass, its gentle, non-abrasive formula ensures your surfaces stay cleaner longer without leaving behind any oily residue. Enjoy the added benefits of a dust and water-repelling finish that simplifies maintenance and a formula free from harmful silicones, oils, waxes, glycerin, and petroleum distillates. Ideal not only for RVs but also for boats, watercraft, and various outdoor items, Roof-Gard secures the longevity and pristine condition of your investments. Apply it to enhance and protect countertops, spa covers, and various types of furniture.
A Tip From Rudy:
Some products sold for RV maintenance contain petroleum distillates and citric ingredients. These chemicals will damage your roof membrane and shorten its life. Whether you choose Dicor’s Roof-Gard or another brand, be sure the products you use do not contain these harmful chemicals.
Directions
- Clean roof first with Dicor Roof Cleaner.
- Spray directly on to clean surface, out of direct sunlght in 3′ X 3′ sections. One quart treats up to a 40′ RV.
- To provide for even coverage, wipe with soft cloth or sponge mop.
- For MAXIMUM UV PROTECTION reapply every 3-5 weeks or after every cleaning.
-
The Dometic Cara D door is a white sandwich door panel for RVs with an aluminium frame and integrated a high security safety mesh screen, including blind and four point locking system. Cut out size required: 1850mm (height), 620mm (width). This item will ship on a pallet so a business address is preferable. Please contact us with any questions! Features:
- Highly durable glass
- Highly resistant safety mesh
- Four-point locking system
- Easy to operate chrome door lever
- Integrated blind that blocks incoming light
-
The Dometic CTLP4110 Toilet redefines the RV bathroom experience with its sleek design and superior functionality. A ceramic inlay bowl offers a touch of home, while the powerful flush system outperforms expectations. The seat, adjustable within a 180° range, provides unparalleled comfort. With a 19-liter capacity, this model mirrors the footprint of the Thetford C200, ensuring an easy fit. Engineered for convenience, it connects to your onboard water system, allowing you to roam freely with the comforts of a high-quality, plumbed-in toilet that's built for the journey. The "Low Profile" option features the shorter back of the toilet compared to the standard CTS-4110.Specifications:
- Waste tank capacity: 19 litres
- Power supply for flush: 12v
- Power input: Max 0.5a with external pump
- Measurements: 382.6mm x 530mm x 592.2mm
-
Looking for a top-quality, attractive window to enhance the side of your motorhome or caravan? The Dometic Dlux Window boasts superb workmanship, materials, and operating convenience. Insulated to help prevent heat loss and reduce noise, the window can be opened to any position. Enjoy more fresh air and a view of the outdoors from your motorhome or caravan. The Dometic Dlux Window can be opened to any position and boasts a built-in aluminium-coated darkening blind and a fly screen. As well as adding privacy, shade and keeping insects out, the fly screen and darkening blind can be clipped together for convenient adjustment with one hand. The double acrylic glazing of the window pane and a robust polyurethane frame ensure added comfort thanks to excellent insulation of heat and noise. A modern flat exterior is a stylish addition to your RV. While, to ensure security, the safety interlock system means this top-hung hinged window cannot be opened from the outside.CHOOSE YOUR SIZE FROM THE DROP DOWN MENU ABOVE!
Features:
- Double acrylic glazing and polyurethane frame for excellent insulation and noise reduction
- Integrated aluminium-coated darkening blind and flyscreen are fully adjustable
- The safety interlock systems prevents opening from the outside
- Friction hinges allow opening to any position
- Quick and easy installation
- Blind and fly screen can be clipped together for convenient
- One-handed adjustment
- Designed to be installed in 34 mm walls
- The window and frame are black in colour
- The blackout / darkening blind is white in colour
- ADR approval for use in Recreational Vehicles
- Dometic number: DOM1040102OS
