- The CBE CB516 is a versatile 16 Amp Switch Mode Battery Charger, designed to efficiently charge 12v lead acid batteries. This charger features advanced protection against overheating, short circuits, and polarity reversal, ensuring safe and reliable charging. The high-frequency switching technology incorporated in this charger provides enhanced performance levels. Its straightforward operation allows for automatic battery charging, making it an ideal choice for those seeking a hassle-free charging solution. Whether for routine maintenance or emergency charging, the CBE CB516 stands out for its safety features and efficient charging capabilities.
- The CBE CB522 12V Battery Mains 230V Charger is a sophisticated charging solution, tailored for motorhome, caravan, and boating sectors. This Switch Mode Battery Charger is capable of charging 12V gel or lead-acid batteries automatically. Its continuous connection capability and the high-frequency switching technology ensure a reduced size and weight, while delivering higher performance. The charger operates in four stages: maximum current charging until the end-charge voltage is reached, a prolonged operation at the end-charge threshold, constant voltage holding, and switching to Stand-by mode after 10 hours, reactivating only when the voltage drops below 13V. This versatile and efficient charger is a must-have for maintaining your 12V batteries in peak condition.The charging process takes place in four stages:1) Battery charging with maximum current until the end-charge voltage is reached. NOTE: the end-charge voltage can only be reached if the battery is fully efficient.2) When the end-charge threshold is reached the battery charger continues to operate for 90 minutes (lead-acid batteries) or 8 hours (lead-gel batteries) with constant voltage.3) Constant voltage holding at 13.8 V (gel batteries.) or 13.5 V (lead acid batteries.).4) After 10 hours, the battery charger switches to the Stand-by mode and begins to charge again only when the battery voltage is lower than 13 V.
- Introducing the CBE CB522-LT, a cutting-edge lithium 12V battery charger designed for maximum efficiency and safety. This charger employs an automatic charging system that operates in four distinct phases: Bulk, Absorption, Float, and Refresh. The Bulk phase charges the battery with maximum current until the end-of-charge voltage is reached. Absorption completes the charging at a constant voltage. The Float phase maintains the battery at a constant voltage of 13.5V for up to 240 hours, and the Refresh phase recharges the battery to 14.5V. This cycle ensures your lithium battery remains in optimal condition, adapting to varying power needs. The CB522-LT's advanced technology caters specifically to lithium batteries, providing a tailored and safe charging process. It's an ideal choice for those seeking a reliable, high-performance lithium battery charging solution. Automatic charging system takes place in four phases:Phase 1: Bulk – The battery is charged with maximum current until the end-of-charge voltage is reached.Phase 2: Absorption – Battery charging is completed with constant end-of-charge voltage for a maximum time of 1h (or 30 minutes with I<5A).Phase 3: Float – Maintenance charging at a constant voltage of 13.5V for a maximum time of 240 hours. The cycle is resumed from the bulk phase if battery voltage drops below 12.7V after a high load has been switched on.Phase 4: Refresh – The battery is charged to the voltage of 14.5V for a maximum time of 30 minutes (or up to I<5A). Afterwards, the charge restarts from the float phase.
- The Powertech MB3940 Multi-Stage Battery Charger 20A DC/DC is an advanced solution for charging both lead and lithium batteries. It efficiently manages solar and alternator power inputs to charge an auxiliary battery system, prioritizing solar to reduce engine load. This charger isolates the starting battery when the engine is off to prevent discharge. Its microprocessor-controlled circuit switches between six charging modes: Qualification, Recondition, Bulk, Absorption, Check, and Maintenance. Housed in a heavy-duty aluminum case, it supports various battery types including Lead acid, AGM, Calcium, GEL, and LiFePO4. With safety protections like overcharge, short circuit, and over-temperature, it's a comprehensive charging solution for diverse needs.ÂFeatures:- Dual input - solar and/or alternator/car battery- 20A max charging current (automatically controlled)- Six-stage Battery Charging- Supports Lead acid, AGM, Calcium, GEL or LiFePO4 batteriesÂSpecifications:Solar Panel Open Circuit Voltage: 16~25V max.Rated Output Power: 13.5~15.4V @ 20AOutput (Charge) Voltage:AGM/GEL: 14.3V (Boost), 14.7V (Absorption), 13.5V (Float)Lead acid:Â 14.0V (Boost), 14.4V (Absorption), 13.5V (Float)Calcium: 15.0V (Boost), 15.4V (Absorption), 13.5V (Float)LiFePO4:Â 14.0V (Boost), 14.4V (Absorption)
DC current rating : 20A Operating Temperature : -10°C, 45°C Length : 208mm Width : 136mm Height : 38mm Weight : 0.71kg Packaged Volume : 3.05l Packaged Weight : 1.17kg Packaged Length : 31cm Packaged Width : 20.5cm Packaged Height : 4.8cm Output Type : Bare Leads Type of Batteries : Lead AcidLithium Ferrous Phosphate (LiFePO4)AGM Type of converter or transformer : DC to DC Max PV Open Circuit Voltage : 25V - The Victron Orion-Tr Smart DC-DC Charger is a professional, adaptive 3-stage charger with built-in Bluetooth, designed for use in dual battery systems in vehicles or boats. It efficiently charges the service battery using the alternator and start battery, can be monitored and programmed via Bluetooth, and features a remote control option. This charger is suitable for both lead acid and lithium batteries, handling high temperatures and offering a full-rated output up to 40°C, making it a versatile and reliable choice for managing your charging needs.Victron Number: ORI121236140Datasheet:P20628 Victron Charger Data SheetOperating Instructions:P20628 Victron Charger Operating ManualP20628 Victron Connect 2 Operating Manual