×
CART
Cart is empty.
Fill your cart with amazing items
Shop Nowbdfg
$ 0.00
(incl. tax)
View Cart

Can’t find what you’re looking for? Click here to let us know what you need.

shipping-new

same day shipping

We aim to be the best!

Competitive Pricing

30-day return policy

Easy Returns

Prefer to order over the phone? Give us a call! (02) 4728 3366

  • Lippert Standard Style Slide Out Rack Repair Kit.This kit does the rear of the slide out, as long as you have a Slide Out on the driver's side.2 x Rails and Bearing Block repair parts included.Lippert part number: 366154SEE SECOND GALLERY PICTURE FOR THE DIFFERENCE BETWEEN STANDARD AND INVERTED.
  • This very popular vent cover eliminates smoke, odours, heat build-up, mildew and mustiness. Lets in fresh air, but not rain.Fits most standard roof vent openings 355-400mm. Installs in about 10 minutes.High impact plastic with UV inhibitors lets light into the interior of the Campervan or Motorhome. Zero leak mounting system eliminates the need for drilling any holes in your RV roof. Includes mounting hardware.All hardware provided with Zero-Leak Mounting System is made of stainless steel or aluminium for durability and long life.Fitting Instructions:
    • Place the Vent Cover over the roof vent with the louvre area facing the rear of the vehicle. After verifying that the Vent Cover is centred over the roof vent, trace on your roof (with a pencil) the location of the slots in the Vent Cover's mounting flange.
    • Position a mounting bracket on your roof so that the slot in the bracket intersects one of the slot locations traced on the roof. For maximum strength place the mounting brackets as close as possible to the outside corner of your existing roof vent frame.
    • Mark the location of the screw hole in the bracket onto your roof vent frame. Drill through the roof vent frame using a 3/16 Inch dia. drill bit. Place one of the carriage bolts upward through the slot in the bracket and fasten the bracket to the roof vent wall using the small bolt provided. The small washer, lock washer, and hex nut should be placed on the inside of the roof vent frame wall. Install two brackets on each side of your roof vent as shown in the drawing.
    • Place the Vent Cover on the four upward pointing carriage bolts and fasten using the large washers and hex nuts provided. You may have to push the head of the carriage bolt up into the bracket slot to prevent the carriage bolt from turning during tightening of the hex nuts.
    A slight air gap between the base of the Vent Cover and the RV roof after installation is normal and permits condensation to escape.
    • 1 year warranty.
    Specifications:
    • Model: 650-04020, 50401150, 008639
    • Brand: Maxxair
    • Original Model: 31-1919
    • Barcode: 752055933061
    • Total base coverage 470mm x 470mm
    • Approx height 300mm
    • Not suitable for high powered fans
  • Genuine replacement waste cassette to suit Thetford C220 series toilets.This will NOT fit any other toilet – Check SpecificationsComes cpmplete with Wheels & Pull HandleBrand: ThetfordSuits Thetford C223 S / C223 CS / C224 CW Cassette Toilets18L capacityThis is the GENUINE original replacement spare part. Beware of aftermarket parts for this product.
  • Plug-and-Play, All-in-One Solution

    The Panel-Stereo from Fusion allows you to enjoy quality audio onboard your boat from the convenience of a single unit – designed to save time and money with a quick and simple installation.

    IP65 Ingress Protection

    Designed and engineered for the harsh marine environment, the Panel-Stereo has an IP65 rating for protection against dust and water ingress. The Panel-Stereo Outdoor comes with a high-grade plastic grille and UV-resistant design.

    Quick And Simple To Install

    The Panel-Stereo operates on 12-volt DC power, an earth connection, AM/FM antenna and a single cutout at most is required at installation – it is a true plug-and-play, all-in-one audio entertainment solution.

    Fusion Digital Signal Processing

    A technically superior listening experience made simple, Fusion DSP optimises the audio signal delivered to your Fusion system to produce superior sound quality at all volume levels.

    Perfectly Tuned Enclosure

    The Panel-Stereo is brilliantly designed – combining built-in amplification, stereo source selection, two 3-inch speakers, and a large surface passive bass radiator to deliver premium, optimised audio onboard from a single unit

    Freedom Of Choice To Listen To What You Want

    Take advantage of the different source options available, including Bluetooth® technology, AM/FM radio, AUX, and USB connections.

    Surface Mounting Spacer

    You can install the panel stereo with a conventional flush mount or premium flat finish. Alternatively use the accessory mounting spacer to surface mount the Panel-Stereo, with no mounting cut-out required.

    Features:

    • Preconfigured Digital Signal Processing (DSP) technology for a superior listening experience.
    • Hi-Fi audio reproduction through preconfigured DSP.
    • Built-in Class-D amplifier delivers higher efficiency and greater output.
    • Optimally tuned, sealed enclosure with two 3-inch speakers and a passive bass radiator.
    • Multiple mounting options are available, including flush, flat, and surface mounting.
    • Control your music from a compatible smart device or Garmin watch.

    Specifications:

    • Dimension 13.54″ X 6.1″ X 1.97″ (344 X 155 X 50 Mm)
    • Weight: 2.54 Lbs (1.15 Kg)
    • Water Rating Ip65 (When Properly Installed)
    • Operating Temperature 32° To 122° F (0° To 50° C)
    • Current (Max) 10 A
    • Bluetooth® Wireless Range Up To 30 Ft (10 Metres)
    • Ant® Wireless Range Up To 10 Ft (3 Metres)
    • Wireless Frequencies/protocols Bluetooth®: 2.4 Ghz @ +12 Dbm Nominal
    • Ant®: 2.4 Ghz @ +7 Dbm Nominal
    • Amplifier Class-d
    • Power Input 10.8 – 16 Vdc
    • Compass Safe Distance 7.6″ (229 Mm)
    • Peak Power 140 Watts
    • Rated Power Output (2 Ohm) 43 Watts Rms X 2 @ 14.4 V Input < 1% Thd
    • Built-in Digital Signal Processing (Dsp) Yes (Preconfigured)
    • Control: Yes (Smart Device And Garmin Watch)
    • Multi-language Interface Chinese (Mandarin), Dutch, English, French, German, Italian, Japanese, Spanish
    • Software Updates USB
    • Supported Sources: Am, Fm, Bluetooth®, USB Audio, Iphone®, Ipod®, Aux X2, AOA
    • Auxiliary Inputs (RCA) 2
    • USB Ports 1
    • Am/fm Ports (Motorola Antenna Connector) 1
    • Line Out 1 RCA Output (Aux)

    What’s in the Box:

    • Fusion® Panel-Stereo
    • Stereo trim
    • Six 6-gauge, self-tapping stainless-steel screws
    • Power wiring harness
    • Documentation

    Owner's Manual:

    Fusion Panel Stereo PS-A302BOD Owner's Manual

    Fitting Instructions:

    Fusion Panel Stereo PS-A302BOD Fitting Instructions
  • The CBE Distribution Box 12v DS450-AN is a high-quality solution, widely used in Australian-built motorhomes. This distribution box is supplied with fuses, ensuring safe and efficient distribution of power throughout your vehicle. It's a crucial component for anyone looking to manage electrical systems in motorhomes effectively. The DS450-AN is manufactured by a trusted supplier, offering reliability and peace of mind for your electrical needs. This distribution box is an essential item for maintaining organized and safe electrical systems in any RV or motorhome.
    Manufacturer number: 205210
  • CBE LCD Control Panel – PC380-KT

    $ 435.00 each incl. GST
    The Control Panel PC380-KT is a comprehensive digital LCD control panel, designed for optimal efficiency and convenience in managing your vehicle's systems. It features a 12V main switch with an LED indicator, pump switch, light switch, and displays for temperature, clock, and fresh water. Additionally, it includes a flashing waste water full display and a 230V control display, along with a battery voltage display. This panel is integral for a comfortable and informed journey, allowing for seamless control and monitoring of various vehicle functions. Its user-friendly interface and comprehensive features make it an ideal choice for efficient vehicle management.Use with DS520-KT Distribution Box, also available in our store.
  • Meet the Thetford Service Door #7, now available in Black. Designed for the modern traveller, this service door boasts UV resilience, ensuring it stands up to nature's challenges. Beyond aesthetics, its double seal guarantees optimal insulation, allowing you to focus on the journey. Adaptable and secure, let this door elevate your travel experience while keeping your vehicle and possessions protected at all times. Journey with confidence with Thetford. Specifications:
    • Thetford number: 2644527
    • Door / Opening Dimensions: 1051mm x 282mm
    • Cut-out Dimensions: 1069mm x 299mm
    • Possible Wall Thickness: 23mm-39mm
  • The CMS Mounting Block, designed exclusively for beige CMS DIY 240v power points, is an essential accessory for your electrical installations. This power point mounting block is ideal for situations where power points cannot fully recess into the wall. It accommodates both double and single CMS power points, offering versatility for various electrical setups. The mounting block allows external cable connections, typically safeguarded within a conduit that aligns with the block's lower face. It features three accessible entry points at the bottom and one on each side, facilitating easy cable entry and secure attachment to the power point. The CMS Mounting Block is not only functional but also aesthetically pleasing, blending seamlessly with your interior decor. It comes with a 1-year warranty, ensuring reliability and customer satisfaction.Features
    • 1 year warranty.
    Specifications
    • Model: 500-04200, JMBBG
    • Brand: CMS
    • Dimensions (w)135mm x (h)105mm x (d)35mm
  • Introducing the Thetford Service Door #3 in white - the ultimate storage companion for your travels. Expertly crafted from UV-resistant materials, this service door promises durability and aesthetic appeal. Whether you're looking for optimum insulation or versatile installation options, this product has you covered. Experience seamless security with the push-button closure system and ensure your vehicle remains protected at all times. Specifications:
    • Thetford number: 2680584
    • Door / Opening Dimensions: 330 x 280mm
    • Cut-out Dimensions: 349 x 296mm
    • Possible Wall Thickness: 23-39mm
  • A crucial component for peak refrigeration performance, the Thetford N3141 Fridge Vent, ensures ample ventilation for absorption refrigerators. Designed specifically for the THETFORD N4141 Absorption Refrigerator, this vent ensures efficient airflow, enhancing your fridge's functionality and prolonging its lifespan.
    • N3141 - 257mm x 432mm
    • H 257mm x W 432mm
    Only Suitable For THETFORD N4141 Absorption RefrigeratorThetford number: 69110027
  • Shurflo Water Inlet with Pressure Regulator - White

    Introducing the Shurflo Water Mains Inlet, your reliable partner for a consistent water supply in RVs and caravans. Engineered with a built-in pressure regulator, it ensures protection against high water pressure while its integrated filter screen keeps foreign materials at bay. Also available in black and offering a standard fit with unmatched reliability, protect your water system with this inlet from Shurflo, an industry leader. Also available in black.Part number M60026.
Go to Top