Shop

Safe-T-Alert Propane Gas Detector – 12v DC 30-442A – Black

$ 129.00 each incl. GST

Safe-T-Alert Propane Gas Detector - 12v DC 30-442A - Black quantity
Prioritize your safety with the Safe-T-Alert Propane Gas Detector – 12v DC 30-442P in black.

Designed impeccably for the RV environment, this detector is a must-have for RVs, motorhomes, and caravans.

Its advanced technology, including an Alarm Mute button, guarantees prompt detection and alert in case of LPG presence.

Powered by 12 volts, forget the hassle of batteries.

The maintenance-free built-in sensor promises a long life and self-cleaning features.

With its loud 85 dB alarm, always stay a step ahead in ensuring safety.

Its sleek dimensions fit perfectly, making it an ideal replacement for most CCI Controls LP Gas Leak Detectors.

Needs to be replaced every 5 years.

Item Dimensions are Outer: 160mm x 72mm x 34mm & Inner area: 106mm x 47mm x 30mm
Add to cart Details Quick View
MaxxAir Vent Cover 400 x 400 – Suits standard size Roof Hatches

$ 132.00 each incl. GST

MaxxAir Vent Cover 400 x 400 - Suits standard size Roof Hatches quantity
This very popular vent cover eliminates smoke, odours, heat build-up, mildew and mustiness. Lets in fresh air, but not rain. Fits most standard roof vent openings 355-400mm. Installs in about 10 minutes. High impact plastic with UV inhibitors lets light into the interior of the Campervan or Motorhome. Zero leak mounting system eliminates the need for drilling any holes in your RV roof. Includes mounting hardware. All hardware provided with Zero-Leak Mounting System is made of stainless steel or aluminium for durability and long life. Fitting Instructions:

Place the Vent Cover over the roof vent with the louvre area facing the rear of the vehicle. After verifying that the Vent Cover is centred over the roof vent, trace on your roof (with a pencil) the location of the slots in the Vent Cover's mounting flange.

Position a mounting bracket on your roof so that the slot in the bracket intersects one of the slot locations traced on the roof. For maximum strength place the mounting brackets as close as possible to the outside corner of your existing roof vent frame.

Mark the location of the screw hole in the bracket onto your roof vent frame. Drill through the roof vent frame using a 3/16 Inch dia. drill bit. Place one of the carriage bolts upward through the slot in the bracket and fasten the bracket to the roof vent wall using the small bolt provided. The small washer, lock washer, and hex nut should be placed on the inside of the roof vent frame wall. Install two brackets on each side of your roof vent as shown in the drawing.

Place the Vent Cover on the four upward pointing carriage bolts and fasten using the large washers and hex nuts provided. You may have to push the head of the carriage bolt up into the bracket slot to prevent the carriage bolt from turning during tightening of the hex nuts.

A slight air gap between the base of the Vent Cover and the RV roof after installation is normal and permits condensation to escape.

1 year warranty.

Specifications:

Model: 650-04020, 50401150, 008639

Brand: Maxxair

Original Model: 31-1919

Barcode: 752055933061

Total base coverage 470mm x 470mm

Approx height 300mm

Not suitable for high powered fans
Add to cart Details Quick View
Apex Valves Tempering Valve HEAT155012-IP

$ 135.00 each incl. GST

Apex Valves Tempering Valve HEAT155012-IP quantity
Elevate your RV and caravan experience with the Apex Valves Tempering Valve HEAT155012-IP. Crafted for meticulous temperature regulation, this valve ensures a safe and consistent water temperature at all times, reducing scalding risks when you're showering, washing your hands or doing the dishes. With easy-to-clean mesh filter seals, this valve is also lightweight and easy to install, offering an efficient and dependable performance for every adventure. Upgrade your water system and ensure your safety today. Features:

Fast installation times

Lightweight and easy to install

Easy-to-clean mesh filter seals

Simple to service

Pre-set 50 degrees celsius

AS/NZ 4020 (Water contract approval

Specifications:

Cold water supply temperature: 5 - 25 degrees

Hot water supply temperature: 55 - 80 degrees

Minimum flow rate: 5 Litres per minute

Set temperature: 50 degrees

Accuracy of outlet temperature: +/- 3 degrees

Maximum Working Pressure (static): 16 Bar (1600Kpa)

Maximum Working Pressure (dynamic): 5 Bar (500Kpa)Apex part number: HEAT155012-IP
Add to cart Details Quick View

White Marine Speakers 6.5″ 80-Watt – Fusion® EL Series

$ 135.00 each incl. GST

The Fusion® EL Series Marine Speakers 6.5″ 80-Watt Classic White offer exceptional audio quality for your RV or boating experience. Designed for the marine environment, these speakers feature an IP65 rating for dust and water resistance and are tested for high-level protection against salt fog and UV. The shallow basket design ensures versatile installation, and the injection-moulded polypropylene cone provides clean, clear audio. These speakers are not only robust and durable, but also have a classic style grille, making them both a functional and aesthetic addition to any marine setting.

DESIGNED AND ENGINEERED FOR THE MARINE ENVIRONMENT

The EL Series speakers have an IP65 rating for protection against dust and water ingress and have been tested to a high level of protection against salt fog and UV.

DESIGNED TO COMPLY WITH ISO12216

Tested to international standards for pressure and water ingress, the EL Series speakers are designed and built for superior quality and robustness.

QUALITY MATERIALS AND ACOUSTIC ENGINEERING

The EL Series speakers incorporate high-quality materials and marine-specific design elements, ensuring they look and sound great on the water.

INJECTION-MOULDED POLYPROPYLENE (IMPP) CONE

A translucent, water-resistant IMPP cone improves the robustness and durability of these classic marine speakers, allowing for clean, clear audio reproduction.

LIGHTWEIGHT VOICE COIL

The lightweight design allows for higher sensitivity, resulting in increased power and efficiency to deliver an enhanced audio experience.

OPEN BASKET CONSTRUCTION

The optimised open back design allows for extended power handling and versatile mounting options with reduced mounting depth.

General

Physical dimensions (Diameter x Depth)	6.93″ x 2.26″ (176 x 57.5 mm)
Water and dust rating	IP65
Configuration	Full range
Speaker size	6.5″
Peak power (Watts)	80 W
RMS power (Watts)	20 W
Sensitivity (1 W / 1 m)	91 dB
Frequency response	45 Hz-16 kHz
Nominal impedance	4 ohms
Recommended amplifier power (RMS)	20-40 W/Ch
Operating temperature range	32° to 122° F (0° to 50° C)
Voice coil diameter	0.79″
Cone material	Polypropylene cone with cloth surround
Compass-safe distance	100″ (254 cm)
Warranty	1 year

Mounting dimensions

Mounting diameter clearance	5.12″ (130 mm)
Mounting depth clearance	1.69″ (43 mm)

Kit Contains:

One pair of speakers (based on what you select)
12 Phillips stainless steel mounting screws (4.2 mm x 25.4 mm (8 gauge x 1″))
Two 20 ft (6 metre) speaker cables
Documentation

Add to cart Details Quick View

Black Marine Speakers 6.5″ 80-Watt – Fusion® EL Series