-
Step outside into nature and immerse yourself in an unparalleled shower experience with this external shower from RV Spares. Tailored for top-tier motorhomes, this kit is complete with taps and nozzles ensuring a smooth flow and easy control every time. The built-in switch on the nozzle offers optimal flow control, and its locking feature ensures security when the shower is not in use. Easy installation, quality build, and a competitive price tag make this external shower a coveted addition to any RV. Outer Dimensions 324mm width 195mm height 80mm depth Inner Dimensions 275mm width 145mm height -
The RV Electronics Twin Water Tanks & Voltmeter LCD Gauge is an advanced monitoring tool with a colored LCD analog display and LED backlighting. It displays five levels and requires a 12V supply, drawing only 50 mA. The gauge has a power on/off switch and is compatible with various lead sender probe lengths. This gauge is perfect for monitoring water levels in RVs, ensuring efficient use of resources and preventing potential issues. The LCD design offers clear visibility, and its low power consumption makes it ideal for continuous use without draining the battery. THIS LISTING IS FOR THE GAUGE ONLY. RV TANK SENDER PROBES ARE REQUIRED. If you don't have a 12 volt supply consider the LCD water gauge versions as they have an on-board battery.
-
This kit contains both the vent cap and the base. This two-in-one kit saves you time and money if your in need of a new Dometic Roof Vent Base and Cap. Genuine Dometic items!
-
The RV Electronics LCD Triple Tank Water Level Gauge is an innovative solution for monitoring water levels in RVs. It features a colored LCD analog display with LED backlighting for clear viewing in any condition. This gauge displays five levels, requires a 12V supply, and is remarkably energy-efficient, drawing only 50 mA. Its power on/off switch adds convenience, and it's compatible with various lead sender probe lengths, making it a versatile tool for managing water resources efficiently in your RV. THESE PRICES ARE FOR THE GAUGE ONLY. RV TANK SENDER PROBES ARE REQUIRED. If you don't have a 12 volt supply consider the LCD water gauge versions as they have an on-board battery.
-
This Compact External Shower Point is an ideal addition to your camper or RV for showers, rinsing off sand after beach visit, hosing pets etc. It uses the unit's existing hot and cold water supplies. Inserting the shower assembly, locks it in place and turns on the water. Temperature adjustment by turning the assembly.
The External shower point comes complete with a Shower head assembly (shower fitting, shower hose and swivel head).
2 brass shafts accept 12mm John Guest push-on fittings.
1 year warranty.
Model: 800-06007
Shipping Weight: 1.02 Kgs.
Shipping Dimensions: 12 cm x 25 cm x 20 cm.
-
The Bromic Waterboy 12 volt Diaphragm water pump is capable of distributing an 11 LPM water flow across many caravan, or RV vehicles, as well as various agriculture and recreational uses. Featuring a constant speed pump with a 55 PSI (3.8 BAR) rating with a self priming height of 1.8m. Included is soft noise absorbing mounting feet with an inline filter and two (2) ½” Barb fittings. Comes complete with our 2 year replacement warranty.
Features and Benefits:
- 11 LPM 12V DC water pump
- Self priming (1.8,)
- Low power draw of 7.5 Amp
- Shut off pressure at 55 PSI
- 4 Chamber delivers quiet smooth operation
- Runs dry without damage
- Easy connecting system
- Corrosion resistant valves
- Includes accessories
- Filter / strainer
- 2 x 1/2” Barb hose fittings
Specifications:
- Part Number: 9320688218759
- 2 Years Replacement Warranty
- Rated Voltage (V/50Hz): 12
- Max. Current (A): 7.5
- Water Type: Clean
- Outlet Connection: Male
- Outlet Connection Thread Size: 1/2"
-
The Dometic Heki Spoiler – 800MM to suit Heki Skylight is an essential addition for those who travel frequently in their RV or caravan. This optional Seitz Heki Spoiler provides protection at speed, effectively deflecting air over the top of the skylight. It comes in two lengths, depending on the installation orientation, and is recommended for speeds of 100km/h to 130km/h. The spoiler features a 3-month warranty on all Dometic spare parts, ensuring reliability and peace of mind. With dimensions of 810w x 45h x 110d mm, it is specifically designed to suit Seitz Midi Heki lever, crank handle, electric, and Heki 2 models. RV Spares Online offers this model, ZUB1309, 650-00638, as a practical and efficient solution to enhance your RV's aerodynamics and protect your skylight during high-speed travel. Specifications:
- Model: ZUB1309, 650-00638
- Brand: Seitz
- Dimensions: 810w x 45h x 110d mm
- Suits: Seitz Midi Heki lever, crank handle, electric and Heki 2 models.
-
Experience the blend of aesthetics and functionality with this one-piece stainless steel sink from NCE. This square sink, tailor-made for caravans or RVs, is both elegant and durable and features a sink and drying area with moulded grooves to allow water to drain freely. Apart from its lustrous silk finish, it features an off-centre drain plug, ensuring efficient drainage every time. Plus, every sink comes equipped with basket waste, clips, and sealing tape to ensure a hassle-free setup, allowing you to get back on the road and focus on your adventure. Specifications:
- Silk finish
- Stainless steel
- Off-centre drain plug
- SS304 Material
- Basket waste
- Clips & sealing tape
- Overall – 605(W) x 440(L)
- Bowl – 350(W) x 370(L) x 180(D)mm
- Radius – 65mm
- Thickness – 0.8mm
-
Embrace the sleek, modern design of the NCE 400mm White Round Ceramic Basin, a stunning addition to any contemporary bathroom. With an above-counter installation and a generous 8.5L capacity, this round ceramic basin marries style with functionality. Its robust base ensures secure fitting, while the smooth, round shape adds an air of elegance. Perfect for those seeking a chic and practical bathroom centerpiece, this basin adds the ultimate touch of sophistication to any mobile living setup - upgrade yours today with RV Spares. Specifications:
- Water Capacity 8.5L
- Dimensions (mm) 400(Dia) x 150(H)
- Weight 7.45kg
- Modern & elegant design
- Above counter installation
- Large base for secure installation
-
- Prioritize your safety with the Safe-T-Alert Gas Detector – 12v DC 30-442P in brown.
- Designed impeccably for the RV environment, this detector is a must-have for RVs, motorhomes, and caravans.
- Its advanced technology, including an Alarm Mute button, guarantees prompt detection and alert in case of LPG presence.
- Powered by 12 volts, forget the hassle of batteries.
- The maintenance-free built-in sensor promises a long life and self-cleaning features.
- With its loud 85 dB alarm, always stay a step ahead in ensuring safety.
- Its sleek dimensions fit perfectly, making it an ideal replacement for most CCI Controls LP Gas Leak Detectors.
- Needs to be replaced every 5 years.
-
- Prioritize your safety with the Safe-T-Alert Propane Gas Detector – 12v DC 30-442P in white.
- Designed impeccably for the RV environment, this detector is a must-have for RVs, motorhomes, and caravans.
- Its advanced technology, including an Alarm Mute button, guarantees prompt detection and alert in case of LPG presence.
- Powered by 12 volts, forget the hassle of batteries.
- The maintenance-free built-in sensor promises a long life and self-cleaning features.
- With its loud 85 dB alarm, always stay a step ahead in ensuring safety.
- Its sleek dimensions fit perfectly, making it an ideal replacement for most CCI Controls LP Gas Leak Detectors.
- Needs to be replaced every 5 years.
-
- Prioritize your safety with the Safe-T-Alert Propane Gas Detector – 12v DC 30-442P in black.
- Designed impeccably for the RV environment, this detector is a must-have for RVs, motorhomes, and caravans.
- Its advanced technology, including an Alarm Mute button, guarantees prompt detection and alert in case of LPG presence.
- Powered by 12 volts, forget the hassle of batteries.
- The maintenance-free built-in sensor promises a long life and self-cleaning features.
- With its loud 85 dB alarm, always stay a step ahead in ensuring safety.
- Its sleek dimensions fit perfectly, making it an ideal replacement for most CCI Controls LP Gas Leak Detectors.
- Needs to be replaced every 5 years.
-
This very popular vent cover eliminates smoke, odours, heat build-up, mildew and mustiness. Lets in fresh air, but not rain. Fits most standard roof vent openings 355-400mm. Installs in about 10 minutes. High impact plastic with UV inhibitors lets light into the interior of the Campervan or Motorhome. Zero leak mounting system eliminates the need for drilling any holes in your RV roof. Includes mounting hardware. All hardware provided with Zero-Leak Mounting System is made of stainless steel or aluminium for durability and long life. Fitting Instructions:
- Place the Vent Cover over the roof vent with the louvre area facing the rear of the vehicle. After verifying that the Vent Cover is centred over the roof vent, trace on your roof (with a pencil) the location of the slots in the Vent Cover's mounting flange.
- Position a mounting bracket on your roof so that the slot in the bracket intersects one of the slot locations traced on the roof. For maximum strength place the mounting brackets as close as possible to the outside corner of your existing roof vent frame.
- Mark the location of the screw hole in the bracket onto your roof vent frame. Drill through the roof vent frame using a 3/16 Inch dia. drill bit. Place one of the carriage bolts upward through the slot in the bracket and fasten the bracket to the roof vent wall using the small bolt provided. The small washer, lock washer, and hex nut should be placed on the inside of the roof vent frame wall. Install two brackets on each side of your roof vent as shown in the drawing.
- Place the Vent Cover on the four upward pointing carriage bolts and fasten using the large washers and hex nuts provided. You may have to push the head of the carriage bolt up into the bracket slot to prevent the carriage bolt from turning during tightening of the hex nuts.
- 1 year warranty.
- Model: 650-04020, 50401150, 008639
- Brand: Maxxair
- Original Model: 31-1919
- Barcode: 752055933061
- Total base coverage 470mm x 470mm
- Approx height 300mm
- Not suitable for high powered fans
-
Elevate your RV and caravan experience with the Apex Valves Tempering Valve HEAT155012-IP. Crafted for meticulous temperature regulation, this valve ensures a safe and consistent water temperature at all times, reducing scalding risks when you're showering, washing your hands or doing the dishes. With easy-to-clean mesh filter seals, this valve is also lightweight and easy to install, offering an efficient and dependable performance for every adventure. Upgrade your water system and ensure your safety today. Features:
- Fast installation times
- Lightweight and easy to install
- Easy-to-clean mesh filter seals
- Simple to service
- Pre-set 50 degrees celsius
- AS/NZ 4020 (Water contract approval
- Cold water supply temperature: 5 - 25 degrees
- Hot water supply temperature: 55 - 80 degrees
- Minimum flow rate: 5 Litres per minute
- Set temperature: 50 degrees
- Accuracy of outlet temperature: +/- 3 degrees
- Maximum Working Pressure (static): 16 Bar (1600Kpa)
- Maximum Working Pressure (dynamic): 5 Bar (500Kpa)Apex part number: HEAT155012-IP
-
The Fusion® EL Series Marine Speakers 6.5″ 80-Watt Classic White offer exceptional audio quality for your RV or boating experience. Designed for the marine environment, these speakers feature an IP65 rating for dust and water resistance and are tested for high-level protection against salt fog and UV. The shallow basket design ensures versatile installation, and the injection-moulded polypropylene cone provides clean, clear audio. These speakers are not only robust and durable, but also have a classic style grille, making them both a functional and aesthetic addition to any marine setting.
DESIGNED AND ENGINEERED FOR THE MARINE ENVIRONMENT
The EL Series speakers have an IP65 rating for protection against dust and water ingress and have been tested to a high level of protection against salt fog and UV.
DESIGNED TO COMPLY WITH ISO12216
Tested to international standards for pressure and water ingress, the EL Series speakers are designed and built for superior quality and robustness.
QUALITY MATERIALS AND ACOUSTIC ENGINEERING
The EL Series speakers incorporate high-quality materials and marine-specific design elements, ensuring they look and sound great on the water.
INJECTION-MOULDED POLYPROPYLENE (IMPP) CONE
A translucent, water-resistant IMPP cone improves the robustness and durability of these classic marine speakers, allowing for clean, clear audio reproduction.
LIGHTWEIGHT VOICE COIL
The lightweight design allows for higher sensitivity, resulting in increased power and efficiency to deliver an enhanced audio experience.
OPEN BASKET CONSTRUCTION
The optimised open back design allows for extended power handling and versatile mounting options with reduced mounting depth.
General
Physical dimensions (Diameter x Depth) 6.93″ x 2.26″ (176 x 57.5 mm) Water and dust rating IP65 Configuration Full range Speaker size 6.5″ Peak power (Watts) 80 W RMS power (Watts) 20 W Sensitivity (1 W / 1 m) 91 dB Frequency response 45 Hz-16 kHz Nominal impedance 4 ohms Recommended amplifier power (RMS) 20-40 W/Ch Operating temperature range 32° to 122° F (0° to 50° C) Voice coil diameter 0.79″ Cone material Polypropylene cone with cloth surround Compass-safe distance 100″ (254 cm) Warranty 1 year Mounting dimensions
Kit Contains:Mounting diameter clearance 5.12″ (130 mm) Mounting depth clearance 1.69″ (43 mm) - One pair of speakers (based on what you select)
- 12 Phillips stainless steel mounting screws (4.2 mm x 25.4 mm (8 gauge x 1″))
- Two 20 ft (6 metre) speaker cables
- Documentation
-
The Fusion® EL Series Marine Speakers 6.5" 80-Watt Classic Black (Pair) are designed for superior audio performance in harsh marine environments. These speakers have an IP65 rating, ensuring dust and water resistance, and are salt fog and UV stable. Featuring an injection-moulded polypropylene cone for clear sound reproduction, these speakers are ideal for boat owners seeking quality and durability. Their open basket construction allows for extended power handling and versatile mounting options.
DESIGNED AND ENGINEERED FOR THE MARINE ENVIRONMENT
The EL Series speakers have an IP65 rating for protection against dust and water ingress and have been tested to a high level of protection against salt fog and UV.
DESIGNED TO COMPLY WITH ISO12216
Tested to international standards for pressure and water ingress, the EL Series speakers are designed and built for superior quality and robustness.
QUALITY MATERIALS AND ACOUSTIC ENGINEERING
The EL Series speakers incorporate high-quality materials and marine-specific design elements, ensuring they look and sound great on the water.
INJECTION-MOULDED POLYPROPYLENE (IMPP) CONE
A translucent, water-resistant IMPP cone improves the robustness and durability of these classic marine speakers, allowing for clean, clear audio reproduction.
LIGHTWEIGHT VOICE COIL
The lightweight design allows for higher sensitivity, resulting in increased power and efficiency to deliver an enhanced audio experience.
OPEN BASKET CONSTRUCTION
The optimised open back design allows for extended power handling and versatile mounting options with reduced mounting depth.
General
Physical dimensions (Diameter x Depth) 6.93″ x 2.26″ (176 x 57.5 mm) Water and dust rating IP65 Configuration Full range Speaker size 6.5″ Peak power (Watts) 80 W RMS power (Watts) 20 W Sensitivity (1 W / 1 m) 91 dB Frequency response 45 Hz-16 kHz Nominal impedance 4 ohms Recommended amplifier power (RMS) 20-40 W/Ch Operating temperature range 32° to 122° F (0° to 50° C) Voice coil diameter 0.79″ Cone material Polypropylene cone with cloth surround Compass-safe distance 100″ (254 cm) Warranty 1 year Mounting dimensions
Kit Contains:Mounting diameter clearance 5.12″ (130 mm) Mounting depth clearance 1.69″ (43 mm) - One pair of speakers (based on what you select)
- 12 Phillips stainless steel mounting screws (4.2 mm x 25.4 mm (8 gauge x 1″))
- Two 20 ft (6 metre) speaker cables
- Documentation
-
2 Years warranty
Product Specifications:
- Power Input: 12V DC
- Power consumption: 4W
- Roof thickness 28 – 80 mm
- Cut-out size 280 x 280 mm
- Outer shell size 358 x 363 mm
- Inner shell size 320.5 x 320.5 mm
- Weight: 2.19Kg
-
Trust Lippert and RV Spares to provide the perfect fit for your slide-out system’s needs!
- Set of 2 standard bearing blocks – upper and lower
- Once fitted, bearing teeth point downward
- Does not come with plastic shoes
- Easy to install inside the side wall
- No assembly required; for use on LCI in-wall slide-outs only
- The best way to tell the difference with bearing blocks is the feet where the plastic shoes mount on. These ones point downwards away from the wheel.
- Lippert number: 379060
Can’t find what you’re looking for? Click here to let us know what you need.
shipping-new
same day shipping
We aim to be the best!
Competitive Pricing
30-day return policy
Easy Returns
Can’t find what you’re looking for? Click here to let us know what you need.
shipping-new
same day shipping
We aim to be the best!
Competitive Pricing
30-day return policy
Easy Returns
shipping-new
same day shipping
We aim to be the best!
Competitive Pricing
30-day return policy
Easy Returns
