- Begin the restoration of your RV's rubber roof with Dicor's Roof Cleaner/Activator Part 1. This crucial first step in a two-part coating system prepares your EPDM roofing for optimal adhesion of the acrylic coating, ensuring a prolonged life and improved performance. Its easy spray-on application and quick drying formula make it user-friendly, while its formulation is designed to be safe for your RV's surfaces. Enhance your RV's roof with this effective cleaner, saving labor and extending your roof's lifespan with Dicor's trusted solution.
- Complete your RV roof restoration with Dicor's Acrylic Roof Coating Part 2, the final step in a two-part system designed to renew and protect your rubber roofing. This high-solids acrylic elastomer coating offers superior weatherability, UV resistance, and flexibility, ensuring your RV's roof remains in top condition. Suitable for EPDM rubber & PVC roofing, it requires prior application of Dicor’s Cleaner/Activator for best results. With easy application and exceptional protective qualities, Dicor's Acrylic Coating is essential for extending the life and enhancing the appearance of your RV roof.Two coats are required.
For use on:
EPDM rubber & PVC roofing: Dicor’s Part 1 Cleaner/Activator Primer (RP-CRP-Q) is required prior to coating.Preparation:
Thoroughly mix the contents for a minimum of 5 minutes prior to application. Use plastic sheeting to protect sidewalls and end caps of units. Be sure plastic runs to the ground/floor. EPDM and PVC roof surface must be cleaned/primed with Dicor’s Part 1 Cleaner/Activator (RP-CRP-Q) and free of residue or loose particles. Surface shall be completely dry and frost free before coating. Deteriorated or damaged substrates shall be repaired or replaced.Weather Precautions:
Dicor Acrylic Coating requires complete evaporation of water to cure. Cool temperatures and high humidity may slow down the curing process. Do not apply if weather conditions will not permit complete cure before rain, dew or freezing temperatures occur. Dicor Acrylic Coating will freeze and become unstable at temperatures below 32° F within a 48 hour period after application.Application:
Be sure the Part 1 Cleaner/Activator Priming process is complete prior to applying acrylic coating. Coating may be applied by medium nap roller or brush. Dicor Acrylic Coating shall be applied in a minimum of 2 coats at a rate of 1 gallon/125 sq. ft. per coat (i.e. 8’ X 30’ roof takes 4 gallons). Actual gallons required will depend on the type of surface, texture, method of application and weather conditions at the time of application. All surfaces must be uniformly coated and free from voids, pinholes, or blisters.Entire coating process MUST be completed in one day, including Part 1 Cleaner/Activator and two coats of Acrylic Coating, each dry to the touch before proceeding.Caution: Keep out of reach of children. - The Tufflex PVC Roofing is a non-fleece backed PVC material that is puncture resistant and tear resistant.Tufflex is flexible with all the advantages of EPDM.We will provide 2 tubs of glue adhesive with this purchase.
- Highly flexible for easy installation
- Tear & puncture resistant
- Remains flexible throughout its lifetime
- Not affected by ponding water
- Sun, weather & chemical resistant
- Easy to maintain
- Introducing the Dicor Rubber Roof Cleaner Concentrate – the ultimate 3.78L refill bottle designed specifically for RV maintenance. Crafted for EPDM rubber roofing, TPO, vinyl, fiberglass, and other exterior surfaces, this roof cleaner effortlessly lifts dirt and grime while being gentle on your RV. Its special formula includes water-softening agents that tackle hard water spotting, ensuring a spotless and radiant finish.Dicor's Roof Cleaner is safe for routine use and comes recommended for a variety of vehicles, including boats and motorcycles, thanks to its professional strength and biodegradable composition. For optimum care, follow up with Dicor Roof-Gard Roof Protectant to extend the life and look of your RV's roofing.For best results, follow with Dicor Roof-Gard Roof Protectant. IMPORTANT: Some products sold for RV maintenance contain petroleum distillates and citric ingredients. These chemicals will damage your roof membrane and shorten its life. Whether you choose Dicor’s Rubber Roof Cleaner or another brand, be sure the products you use do not contain these harmful chemicals.
- Rinse roof to remove loose dirt.
- Spray directly onto dirty surface area.
- Using a sponge, medium bristle brush, wash mitt or cloth, scrub surface in a circular motion.
- Rinse off with water and allow to dry completely. Repeat if necessary.
- For best results, follow with Dicor Roof-Gard Rubber Roof Protectant.
- Dicor Self-Leveling Lap Sealant creates a secure, secondary seal over and along the roof edges, vents, hatches, solar panel brackets and screw heads.Suitable EPDM, TPO and PVC membranes, it adheres to aluminum, mortar, wood, vinyl, galvanized metal, fiberglass and concrete.
- This sealant makes a very nice self levelled finish on roofs - not suitable for walls
- This sealant makes it possible to create a continuous seal yet remain flexible.
- May be painted over after outer skin has formed.
- Clean surface of all dirt, loose paint, rust, oil and grease.
- Allow surface to dry before applying sealant.
- Use standard caulking gun or pumping system to apply sealant.
- In cold weather, warm container at room temperature before use.