Can’t find what you’re looking for? Click here to let us know what you need.

same day shipping

We aim to be the best!

Competitive Pricing

30-day return policy

Easy Returns

Prefer to order over the phone? Give us a call! (02) 4728 3366

Dicor Products

Keep your RV in peak condition with Dicor Products. Our range of Dicor roof maintenance supplies ensures your roof remains in top shape, offering reliable protection against the elements.

  •

    Dicor Roof Renew Kit

    $ 1,099.00 each incl. GST
    Rejuvenate your RV's aesthetic and ensure it remains in prime condition with the Dicor Roof Renew Kit, expertly engineered for 30 ft. RV units. Our comprehensive package delivers everything required for a full restoration, with clear instructions for easy application. Kit Components Overview: Cleaner/Activator: Unlock the potential of your RV's EPDM roof with our Cleaner/Activator. Its specialized formula transforms the roofing surface, creating an optimal bonding site for the Acrylic Coating. Acrylic Coating: Experience the strength of our high solids acrylic elastomer blend, designed to adapt to your roof's substrate and conditions. Coating Ready Cover Tape: Fortify your RV's roof by seamlessly sealing cracks or tears with our durable, fleece-backed sealing tape. Inclusions: Four gallons of Dicor EPDM Roof Acrylic Coating Two quarts of Cleaner/Activator One 4”x50’ roll of Coating-Ready Cover Tape Metal pan, 9” paint roller, two roller covers Masking tape and detailed instructions SURFACE INSPECTION AND PREPARATION
    1. Remove heavy deposits of dirt, leaves, pine needles and other debris using a broom or air blower. Any rocks or other large objects should also be removed.
    2. Roof must be in good condition. Do not apply on pryable or brittle roofing. EPDM surface must be free of standing water, ice, snow, oils or grease at time of application.
    3. Inspect roof carefully for cracks in the surface. These will need to be repaired later (see Coating Ready Cover Tape).
    4. EPDM Cleaner/Activator is designed for use on rubber roofing surface only and may damage other exterior parts of RV. It is highly recommended that you secure plastic sheeting over entire sidewalls as well as front and rear end caps to protect them from possible damage. If EPDM Cleaner/Activator contacts any surface other than roof, it should be rinsed immediately.
    Dicor Cleaner/Activator Application
    1. DANGER: May cause severe irritation of the eyes and skin, gastrointestinal irritation, nausea, vomiting and diarrhea. May burn muost skin. Prolonged or repeated breathing of vapor or spray mist may be harmful. Use a respirator for protection from vapor or spray mist. Wear chemical resistant gloves, splash proof goggles and rubber overshoes. Avoid eye and skin contact. Do not take internally. Wash thoroughly after handling and before eating or smoking. Keep container closed when not in use.
    2. EPDM Cleaner/Activator is a ready-to-use material. It can be applied using a Hudson-type agricultural sprayer. Safety glasses with side shields and latex gloves are recommended when transferring EPDM Cleaner/Activator from the shipping container to the sprayer. Spray a fine mist that leaves roof damp. Adjust spray for weather conditions if necessary. If EPDM Cleaner / Activator is running off roof, you have used too much. If using a Hudson sprayer, adjust the spray nozzle to achieve a uniform spray pattern with a 3 to 4 foot arc. Application rate is 125 sq. ft. per quart over new or existing surfaces. Do not apply below 40 degrees F (4 degrees C).
    3. Allow EPDM Cleaner/ Activator to stand a minimum of 15 minutes to wet out and react with the EPDM surface. For best results, rinse with clean water using a minimum 2,000 psi pressure washer. Begin the power rinse at the lowest point on the roof and work upwards, keeping the pressure washer tip within 12” of the EPDM surface. Once the highest point on the roof is reached, work down again with a final rinse to remove any excess dirt or debris from the roof. After cleaning, the roof should be “white” in color, which is an indication that the surface has been chemically altered. Allow surfaces to dry thoroughly prior to application of two coats of the Dicor Acrylic Coating
    4. Clean equipment with water and biodegradable detergent. Purge the water from the pump and hoses using Mineral Spirits prior to storing for any length of time.
    Coating Ready Cover Tape
    1. Roof must be cleaned with Cleaner/Activator prior to application of Coating Ready Cover Tape.
    2. Any areas that are torn or cracked may now be repaired using the Coating Ready Cover Tape.
    3. Peel off a few inches of the release liner and carefully position the Coating Ready Cover Tape before applying. Any attempt to reposition the tape after application will damage the material.
    4. Apply pressure starting at the center of the tape and working towards the outside edges, removing any bubbles as you go. When finished, the edges should have no tunnels, openings or fishmouths.
    5. Only apply Coating Ready Cover Tape to areas that are to be coated the same day.
    Dicor Sure-Seal White Acrylic Roof Coating
    1. Using the masking tape provided, mask off roof edging to enable coating to be applied with a clean, straight edge. Also, mask other surfaces where you do not want coating to be applied.
    2. Dicor White Acrylic Coating must be preceded with Dicor EPDM Cleaner/Activator to ensure proper adhesion (See Cleaner/Activator application). Cleaner/Activator must be removed by power washing prior to application of Acrylic Coating.
    3. All surfaces must be clean and free of residue or loose particles, degraded substrate, grease, oil, dirt, or other contaminates. Surfaces shall be completely dry and frost-free before coating.
    4. Dicor Acrylic Coating shall be applied in a minimum of a 2 coats at a rate of 1 gallon per 125 sq. ft. per coat (i.e., 8’X30’ roof takes 4 gallons). Actual gallons required will depend on the type of surface and texture, method of application, and weather conditions at the time of application. All surfaces must be uniformly coated and free from voids, pinholes, or blisters.
    5. Thoroughly mix the contents for a minimum of 5 minutes prior to application. Dicor Acrylic Coating may be applied by roller (provided) or brush. Dicor Acrylic Coating shall be applied in a minimum of 2 coats at a rate of 1 gallon per 125 sq. ft. per coat (i.e., 8’X30’ roof takes 4 gallons).
    6. Allow to dry for 12 to 24 hours depending on weather conditions.
    Add to cart Details Quick View

  • Roof Cleaner / Activator Part 1 – Dicor Rubber Roofing

    $ 55.00 each incl. GST
    Begin the restoration of your RV's rubber roof with Dicor's Roof Cleaner/Activator Part 1. This crucial first step in a two-part coating system prepares your EPDM roofing for optimal adhesion of the acrylic coating, ensuring a prolonged life and improved performance. Its easy spray-on application and quick drying formula make it user-friendly, while its formulation is designed to be safe for your RV's surfaces. Enhance your RV's roof with this effective cleaner, saving labor and extending your roof's lifespan with Dicor's trusted solution.
    Recommended Unit Preparation:
    EPDM CLEANER/ACTIVATOR is designed for use on rubber roofing surface only and may damage other exterior parts of RV. It is highly recommended that you secure plastic sheeting over entire sidewalls as well as front and rear endcaps to protect them from possible damage. If EPDM CLEANER/ACTIVATOR contacts any surface other than roof, it should be rinsed immediately.
    Surface Preparation:
    Remove heavy deposits of dirt, leaves, pine needles and other debris using a broom or air blower. Any rocks, branches, or other large objects should also be removed. EPDM CLEANER/ACTIVATOR can be applied directly over EPDM surfaces containing residual amounts of dirt, dust and other contamination.
    Application:
    EPDM CLEANER/ACTIVATOR is a ready-to-use material. It can be applied using a Hudson-type agricultural sprayer. Safety glasses with side shields and latex gloves are recommended when transferring EPDM CLEANER/ ACTIVATOR from the shipping container to the sprayer. Spray a fine mist that leaves roof damp. Adjust spray for weather conditions if necessary. If EPDM CLEANER/ACTIVATOR is running off roof, you have used too much. If using a Hudson sprayer, adjust the spray nozzle to achieve a uniform spray pattern with a 3 to 4 foot arc. Application rate is 125 sq. ft. per quart over new or existing surfaces. Do not apply below 40°F (4°C). Allow EPDM CLEANER/ACTIVATOR to stand a minimum of 15 minutes to wet out and react with the EPDM surface. RINSE WITH CLEAN WATER. For best results, use a minimum 2,000 psi pressure washer. Using a 15” spray pattern, begin the power rinse at the lowest point on the roof and work upwards, keeping the pressure washer tip within 12″ of the EPDM surface. Once the highest point on the roof is reached, work down again with a final rinse to remove any excess dirt or debris from the roof. If power washer is unavailable, use medium bristle brush, working smaller area at a time, rinsing thoroughly to be sure all cleaner/activator has been removed. After cleaning, the roof should be “white” in color, which is an indication that the surface has been chemically altered. NOTE: Entire project must be completed in one day; including cleaner/activator application, rinsing and 2 coats of acrylic coating, each dry to the touch. Clean equipment with water and biodegradable detergent. Purge the water from the pump. DANGER: CAUSES SEVERE IRRITATION OF THE EYES, CAUSES GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING AND DIARRHEA, BURNS MOST SKIN. Prolonged or repeated breathing of vapor or spray mist may be harmful. Use a respirator for protection from vapor or spray mist. Wear chemical resistant gloves, splash proof goggles and rubber overshoes. Avoid eye and skin contact. Do not take internally. Wash thoroughly after handling and before eating or smoking. Keep container closed when not in use. FIRST AID: If swallowed, do not induce vomiting. Call a physician immediately. Never give anything by mouth to an unconscious person. In case of contact, flush eyes and skin with plenty of water for 15 minutes while removing contaminated clothing and shoes. For eye contact, consult a physician. If skin irritation persists, get medical attention. Wash clothing before reuse. Clean contaminated shoes. If inhaled, move to fresh air. Give oxygen or artificial respiration as needed. Call a physician immediately. KEEP FROM FREEZING • USE ONLY IN A WELL VENTILATED AREA Caution: Keep out of reach of children.
    Add to cart Details Quick View

  • Dicor Acrylic Roof Coating Part 2 – Rubber Roofing

    $ 275.00 each incl. GST
    Complete your RV roof restoration with Dicor's Acrylic Roof Coating Part 2, the final step in a two-part system designed to renew and protect your rubber roofing. This high-solids acrylic elastomer coating offers superior weatherability, UV resistance, and flexibility, ensuring your RV's roof remains in top condition. Suitable for EPDM rubber & PVC roofing, it requires prior application of Dicor’s Cleaner/Activator for best results. With easy application and exceptional protective qualities, Dicor's Acrylic Coating is essential for extending the life and enhancing the appearance of your RV roof. Two coats are required.

    For use on:

    EPDM rubber & PVC roofing: Dicor’s Part 1 Cleaner/Activator Primer (RP-CRP-Q) is required prior to coating.

    Preparation:

    Thoroughly mix the contents for a minimum of 5 minutes prior to application. Use plastic sheeting to protect sidewalls and end caps of units. Be sure plastic runs to the ground/floor. EPDM and PVC roof surface must be cleaned/primed with Dicor’s Part 1 Cleaner/Activator (RP-CRP-Q) and free of residue or loose particles. Surface shall be completely dry and frost free before coating. Deteriorated or damaged substrates shall be repaired or replaced.

    Weather Precautions:

    Dicor Acrylic Coating requires complete evaporation of water to cure. Cool temperatures and high humidity may slow down the curing process. Do not apply if weather conditions will not permit complete cure before rain, dew or freezing temperatures occur. Dicor Acrylic Coating will freeze and become unstable at temperatures below 32° F within a 48 hour period after application.

    Application:

    Be sure the Part 1 Cleaner/Activator Priming process is complete prior to applying acrylic coating. Coating may be applied by medium nap roller or brush. Dicor Acrylic Coating shall be applied in a minimum of 2 coats at a rate of 1 gallon/125 sq. ft. per coat (i.e. 8’ X 30’ roof takes 4 gallons). Actual gallons required will depend on the type of surface, texture, method of application and weather conditions at the time of application. All surfaces must be uniformly coated and free from voids, pinholes, or blisters. Entire coating process MUST be completed in one day, including Part 1 Cleaner/Activator and two coats of Acrylic Coating, each dry to the touch before proceeding. Caution: Keep out of reach of children.
    Add to cart Details Quick View

  • Dicor Roof-Gard UV Protectant Refill Bottle – 3.78L

    $ 149.00 each incl. GST
    Protect your RV's rooftop from the relentless sun with Dicor Roof Gard UV Protectant. This 3.78L refill bottle offers a safeguard against the damaging effects of UV rays, water, and dirt. Suitable for various roof types including rubber, vinyl, PVC, TPO, and fiberglass, its mild, non-abrasive formula ensures cleanliness and prolongs surface life without leaving any residue. With a protective finish that repels dust and water, and a composition free from silicone, oils, waxes, glycerin, or petroleum distillates, it's gentle yet effective. Perfect for an array of outdoor gear and vehicles, this product also protects countertops, furniture, and automotive detailing. Follow Rudy’s advice and opt for Roof-Gard to ensure your RV’s roof membrane remains in peak condition without harmful chemical damage. delmo_orange_roller-copy A Tip From Rudy: Some products sold for RV maintenance contain petroleum distillates and citric ingredients. These chemicals will damage your roof membrane and shorten its life. Whether you choose Dicor’s Roof-Gard or another brand, be sure the products you use do not contain these harmful chemicals.  Directions:
    1. Clean roof first with Dicor Roof Cleaner.
    2. Spray directly on to clean surface, out of direct sunlght in 3′ X 3′ sections.  One quart treats up to a 40′ RV.
    3. To provide for even coverage, wipe with soft cloth or sponge mop.
    4. For MAXIMUM UV PROTECTION reapply every 3-5 weeks or after every cleaning.
    Caution: Do not use on shower floor or any surface where a slippery or slick surface is undesireable.  First Aid:  Harmful if swallowed. If ingested, drink water or milk. If contact with eyes, wash with water for at least 15 minutes. Call a physician immediately.  Caution: Keep out of reach of children.
    Add to cart Details Quick View

  • Dicor RV Paint Protection – Roof-Gard

    $ 39.00 each incl. GST
    Shield your RV's roof from the rigors of nature with Roof-Gard RV Roof Protectant, your go-to solution for RV paint protection. This premium protectant offers your vehicle defense against fading, oxidization, drying, and cracking caused by harsh UV rays, water, and dirt. Suited for a range of materials including rubber, vinyl, PVC, TPO, and fiberglass, its gentle, non-abrasive formula ensures your surfaces stay cleaner longer without leaving behind any oily residue. Enjoy the added benefits of a dust and water-repelling finish that simplifies maintenance and a formula free from harmful silicones, oils, waxes, glycerin, and petroleum distillates. Ideal not only for RVs but also for boats, watercraft, and various outdoor items, Roof-Gard secures the longevity and pristine condition of your investments. Apply it to enhance and protect countertops, spa covers, and various types of furniture. delmo_orange_roller-copy A Tip From Rudy: Some products sold for RV maintenance contain petroleum distillates and citric ingredients. These chemicals will damage your roof membrane and shorten its life. Whether you choose Dicor’s Roof-Gard or another brand, be sure the products you use do not contain these harmful chemicals. Directions
    1. Clean roof first with Dicor Roof Cleaner.
    2. Spray directly on to clean surface, out of direct sunlght in 3′ X 3′ sections.  One quart treats up to a 40′ RV.
    3. To provide for even coverage, wipe with soft cloth or sponge mop.
    4. For MAXIMUM UV PROTECTION reapply every 3-5 weeks or after every cleaning.
    Caution: Do not use on shower floor or any surface where a slippery or slick surface is undesireable. First Aid:  Harmful if swallowed. If ingested, drink water or milk. If contact with eyes, wash with water for at least 15 minutes. Call a physician immediately. Caution: Keep out of reach of children.
    Add to cart Details Quick View

  • Dicor Roof Cleaner Concentrate Refill Bottle – 3.78L

    $ 149.00 each incl. GST
    Introducing the Dicor Rubber Roof Cleaner Concentrate – the ultimate 3.78L refill bottle designed specifically for RV maintenance. Crafted for EPDM rubber roofing, TPO, vinyl, fiberglass, and other exterior surfaces, this roof cleaner effortlessly lifts dirt and grime while being gentle on your RV. Its special formula includes water-softening agents that tackle hard water spotting, ensuring a spotless and radiant finish. Dicor's Roof Cleaner is safe for routine use and comes recommended for a variety of vehicles, including boats and motorcycles, thanks to its professional strength and biodegradable composition. For optimum care, follow up with Dicor Roof-Gard Roof Protectant to extend the life and look of your RV's roofing. For best results, follow with Dicor Roof-Gard Roof Protectant.  IMPORTANT: Some products sold for RV maintenance contain petroleum distillates and citric ingredients. These chemicals will damage your roof membrane and shorten its life. Whether you choose Dicor’s Rubber Roof Cleaner or another brand, be sure the products you use do not contain these harmful chemicals.
    • Rinse roof to remove loose dirt.
    • Spray directly onto dirty surface area.
    • Using a sponge, medium bristle brush, wash mitt or cloth, scrub surface in a circular motion.
    • Rinse off with water and allow to dry completely. Repeat if necessary.
    • For best results, follow with Dicor Roof-Gard Rubber Roof Protectant.
    Caution: Non-flammable. Harmful if swallowed. Avoid contact with eys or prolonged contact with skin. Store away from heat or open flames.  First Aid: If contact with skin concentrated form, wash with soap and water. If contact with eyes, flush with plenty of water for at least 15 minutes and call a physician immediately.  Caution: Keep out of reach of children.
    Add to cart Details Quick View

  • Dicor Rubber Roof Cleaner Concentrate – 478ml

    $ 79.00 each incl. GST
    Keep your RV's roof in immaculate condition with Dicor Rubber Roof Cleaner Concentrate. This 478ml bottle is specially formulated to clean RV EPDM rubber roofs, TPO, vinyl, and fiberglass without harshness. Battle against hard water spots with the cleaner's built-in softening agents and maintain a gleaming surface effortlessly. This cleaner is safe for regular maintenance of all RV roofing and exteriors, and is also suitable for use on boats, personal watercraft, and even automobiles. With its ready-to-use, professional-strength formula, the Dicor Rubber Roof Cleaner is an essential part of your vehicle care routine. For the best results, follow with Dicor Roof-Gard Roof Protectant to give your RV that extra layer of longevity and shine. For best results, follow with Dicor Roof-Gard Roof Protectant.  IMPORTANT: Some products sold for RV maintenance contain petroleum distillates and citric ingredients. These chemicals will damage your roof membrane and shorten its life. Whether you choose Dicor’s Rubber Roof Cleaner or another brand, be sure the products you use do not contain these harmful chemicals.
    • Rinse roof to remove loose dirt.
    • Spray directly onto dirty surface area.
    • Using a sponge, medium bristle brush, wash mitt or cloth, scrub surface in a circular motion.
    • Rinse off with water and allow to dry completely. Repeat if necessary.
    • For best results, follow with Dicor Roof-Gard Rubber Roof Protectant.
    Caution: Non-flammable. Harmful if swallowed. Avoid contact with eys or prolonged contact with skin. Store away from heat or open flames.  First Aid: If contact with skin concentrated form, wash with soap and water. If contact with eyes, flush with plenty of water for at least 15 minutes and call a physician immediately.  Caution: Keep out of reach of children.
    Add to cart Details Quick View

  • Dicor Lap Sealant For Rubber Roofs – Self Levelling Sealant

    $ 35.00 each incl. GST
    Dicor Self-Leveling Lap Sealant creates a secure, secondary seal over and along the roof edges, vents, hatches, solar panel brackets and screw heads. Suitable EPDM, TPO and PVC membranes, it adheres to aluminum, mortar, wood, vinyl, galvanized metal, fiberglass and concrete.
    • This sealant makes a very nice self levelled finish on roofs - not suitable for walls
    Lap sealant is UV stabilized to prevent deterioration and discoloration. It will not stain or discolour the roofing material to which it is applied.
    • This sealant makes it possible to create a continuous seal yet remain flexible.
    We use our regular silicone to fit and adhere the part we are affixing, then use this self leveling product to finish and complete the seal. This product is a sealant not an adhesive.
    • May be painted over after outer skin has formed.
    Prior to application, clean the surface of all foreign materials.  Allow surface to dry.  Use standard caulking equipment to apply Self-leveling Sealant.  In cold weather, warm container at room temperature 16°C – 27°C. DO NOT USE on vertical surfaces. DO NOT USE as splicing cement.   Directions for Use:
    1. Clean surface of all dirt, loose paint, rust, oil and grease.
    2. Allow surface to dry before applying sealant.
    3. Use standard caulking gun or pumping system to apply sealant.
    4. In cold weather, warm container at room temperature before use.
    Add to cart Details Quick View

Title

Toggle Sliding Bar Area

Cart

X
Go to Top