Dicor Acrylic Water-Based Bonding Adhesive – 3.78L

$ 229.00 each incl. GST

Out of stock

Out of stock

Optimize your RV roof installation with the eco-friendly and user-safe Dicor Water-Based Acrylic Bonding Adhesive. This product offers a generous working time and superior coverage, packaged conveniently in a 1-gallon pail. Its formula is specifically concocted for moisture-absorbent substrates, offering a crucial part of Dicor’s trusted three-part roofing system.

Highlights:

Eco-Conscious Formula: Safe for both users and the environment, our adhesive doesn’t compromise on performance.
Extended Working Time: Enjoy a more forgiving application process that accommodates your pace.
Part of a Cohesive System: As a component of Dicor’s roofing system, it promises a secure bond and seamless compatibility with the roofing membrane and lap sealant.
12-Year Warranty Assurance: Follow the installation guide, and Dicor stands by the quality of your RV roof for over a decade.

Upgrade your roof installation today with this top-quality bonding adhesive.delmo_blue_roller-copyhlvd

Surface Preparation: Clean, dry surfaces are required for optimum bond strength.

Application Methods: Apply adhesive evenly at a rate of one gallon for every 160-180 square feet to thte substance by short nap roller.

Open Time: EPDM Rubber and TPO membranes should be immediately rolled onto the adhesive. No waiting time is necessary. Care should be taken to minimize the air trapped between substrates.

Bonding: Mate the surfacs with only enough pressur, evenly applied, to insure good contact between the substrates. Excessive pressure can redistribute the adhesive in an uneven manner.

Empty containers: When “empty” this package may contain harmful vapor and residue. Do not reuse container or remove labels. Follow label warning even “empty”.  Disposal should be in accordance with applicable regulations.

Keep From Freezing. Store products at 50° F to 60° F for maximum storage life. Do not store below 40° F.

This product is NOT intended for seaming rubber to rubber or adhering rubber to metal, fiberglass or plastic surfaces.

User determines suitability for intended use and assumes all risk and liability.

Caution: For Industrial Use Only. Use cautionary information carefully.

Keep out of reach of children.

Contains no hazardous ingredients per OSHA 1910.1200.

Precautions: Vapors are heavier than air. Prevent build-up of vapors. Open all windows and doors. Use only with cross ventilation. Avoid prolonged exposure to the vapors.

Health Hazard Information:

Skin: This product may cause skin irritation upon repeated contact.

Eyes: If splashed into eyes, may cause irritation. Untreated, may cause caustic burns.

Inhalation: Overexposure to high vapor concentration in poorly ventilated areas may cause headaches, nausea and irritation to the nose and throat.

First Aid Information:

Skin: Wash with soap and water. If irritation persists, get medical attention.

Eyes:  Flush eyes with clean water for 15 minutes. Get medical attention.

Inhalation: Remove to fresh air. If not breathing, administer CPR. Get medical attention.

Ingestion: Induce vomiting by giving syrup of Ipecac or by touching finger to back of throat.

In case of fire or spill: Wear self-contained breathing apparatus. Ventilate area and absorb with absorbant material.